4436A - Loudspeaker GENELEC - Free user manual and instructions
Find the device manual for free 4436A GENELEC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active Studio Monitor Loudspeaker |
| Brand | Genelec |
| Model | 4436A |
| Amplification | Bi-amplified with built-in class AB amplifiers |
| Total Power Output | 120 W (60 W for woofer, 60 W for tweeter) |
| Frequency Response | 48 Hz - 20 kHz (± 3 dB) |
| Crossover Frequency | 3.2 kHz |
| Woofer | 6.5 inch (165 mm) cone |
| Tweeter | 1 inch (25 mm) soft dome |
| Input Connections | Balanced XLR, unbalanced RCA |
| Input Impedance | 10 kΩ balanced |
| Controls | Volume control, bass/treble trim, room compensation DIP switches |
| Enclosure Material | Die-cast aluminum with curved shape |
| Dimensions (H x W x D) | 350 mm x 240 mm x 220 mm |
| Weight | 8.2 kg |
| Power Supply | 100-240 VAC, 50/60 Hz (universal mains) |
| Power Consumption | Standby 15 W, maximum 120 W |
| Operating Temperature | 0°C to 35°C |
| Care and Cleaning | Wipe with a soft, dry cloth. Do not use solvents or household cleaners. |
| Safety Instructions | Do not expose to moisture. Do not open cabinet. High voltage inside. Keep away from heat sources. |
| Spare Parts and Reparability | Genuine spare parts available from authorized Genelec service centers. Modular design allows easy replacement of drivers and amplifier modules. |
| General Information | Designed for accurate sound reproduction in professional audio, broadcast, and music production. |
Frequently Asked Questions - 4436A GENELEC
How do I connect the Genelec 4436A to my audio interface?
Use a balanced XLR cable from the interface output to the XLR input on the rear of the speaker. Make sure the speaker is switched off before making connections to avoid pops.
Does the Genelec 4436A require an external amplifier?
No, the 4436A is an active loudspeaker with built-in amplifiers for both the woofer and tweeter. You only need to supply a line-level signal.
Can I adjust the speaker's bass and treble response?
Yes, the rear panel provides tone controls and DIP switches for bass tilt, treble tilt, and room compensation. Refer to the manual for optimal settings.
Is the Genelec 4436A magnetically shielded?
The speaker is designed to be magnetically shielded, making it safe for use near CRT displays and sensitive equipment.
How do I mount or place the 4436A?
The enclosure has threaded mounting points for floor stands, ceiling mounts, or wall brackets. Always follow the manufacturer's recommendations for secure installation.
How do I clean the Genelec 4436A?
Wipe the surface with a soft, dry cloth. If necessary, gently dampen the cloth with water. Never use solvents or abrasive cleaners.
What should I do if there is no sound from the speaker?
Check the power LED, audio source, and cable connections. Verify the volume is not down. If the issue persists, contact a qualified technician.
Can I use the 4436A in a home theater system?
Yes, it works well as a front or surround speaker in a high-quality home theater setup. Ensure proper placement and calibration.
How do I reduce hum or noise?
Use balanced cables, keep the speaker away from power supplies and other interference sources, and verify the grounding of your audio system.
Does the speaker come with a warranty?
Genelec offers a standard warranty covering manufacturing defects. Contact your dealer or local Genelec distributor for details and service.
User questions about 4436A GENELEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual 4436A - GENELEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 4436A by GENELEC.