Fontas-S II - Faucet BLANCO - Free user manual and instructions
Find the device manual for free Fontas-S II BLANCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Kitchen faucet |
| Brand | BLANCO |
| Model | Fontas-S II |
| Category | Faucet |
| Material | Brass body |
| Finish | Chrome |
| Handle type | Single lever |
| Mounting type | Deck mount, single hole |
| Spout type | Swivel spout, rotating |
| Spout height | Approx. 400 mm |
| Spout reach | Approx. 220 mm |
| Flow rate | 5.7 L/min at 3 bar |
| Valve type | Ceramic cartridge |
| Connection size | 1/2 inch female threads |
| Weight | Approx. 2.5 kg |
| Functions | Single-lever control of flow and temperature |
| Installation | Simple DIY installation with standard tools |
| Cleaning | Wipe with a soft damp cloth and mild soap |
| Maintenance | Regular descaling to prevent limescale build-up |
| Safety | Lead-free and complies with drinking water standards |
| Spare parts | Cartridge, o-rings and seals available separately |
| Repairability | Repair-friendly design with replaceable core components |
Frequently Asked Questions - Fontas-S II BLANCO
How do I install the BLANCO Fontas-S II kitchen faucet?
The installation is straightforward. Insert the faucet through the single hole in the countertop, secure it with the mounting nut from below, and connect the hot and cold water supply lines using 1/2 inch connections. Ensure the o-rings are properly seated before tightening.
What tools are needed for installing the faucet?
You will need an adjustable wrench, a basin wrench, and possibly a screwdriver for the mounting nut. Plumber's tape is recommended for sealing the thread connections.
How do I clean the chrome finish?
Use a soft cloth, warm water, and mild dish soap. Avoid abrasive cleaners or scouring pads that can scratch the chrome surface. Dry after cleaning to prevent water spots.
Why has the water flow decreased over time?
A reduced flow is usually caused by lime scale or debris in the aerator or cartridge. Remove the aerator at the spout tip, soak it in vinegar, and brush it clean. If the issue persists, the cartridge may need replacement.
How can I remove limescale from the faucet?
For limescale, wipe the surface with a cloth soaked in a mixture of equal parts water and white vinegar. Avoid letting vinegar sit on the finish for long periods. Rinse and dry thoroughly.
How do I replace the ceramic cartridge?
First shut off the water supply. Remove the handle by unscrewing the set screw, then undo the retaining nut to access the cartridge. Pull out the old cartridge, insert the new one aligning the pins, and reassemble.
Is the Fontas-S II drinking water safe?
Yes, the faucet is manufactured with lead-free materials and meets standards for drinking water safety. It is suitable for use with potable water.
Can the spout be rotated?
Yes, the spout swivels up to 360 degrees, allowing flexible positioning over the sink for cleaning and filling large pots.
What is the flow rate of the faucet?
The flow rate is approximately 5.7 liters per minute at a water pressure of 3 bar. This provides efficient water usage while delivering a comfortable stream.
How long is the warranty and what does it cover?
BLANCO typically offers a limited lifetime warranty on the finish and a 5-year warranty on parts. The warranty covers defects in material and workmanship, excluding normal wear, misuse, or improper installation.
User questions about Fontas-S II BLANCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Faucet in PDF format for free! Find your manual Fontas-S II - BLANCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fontas-S II by BLANCO.