JET Stand - CPU Cooler NGS - Free user manual and instructions
Find the device manual for free JET Stand NGS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | CPU Cooler (Air Cooling) |
| Brand | NGS |
| Model | JET Stand |
| Compatibility | Intel LGA 1700/1200/115x, AMD AM5/AM4 |
| Material | Aluminum fin stack, copper heat pipes |
| Heat Pipe Size | 6 mm |
| Number of Heat Pipes | 4 |
| Fan Size | 120 mm x 120 mm x 25 mm |
| Fan Speed | 800 - 1800 RPM (PWM) |
| Max Airflow | 65 CFM |
| Noise Level | 20 - 35 dBA |
| Bearing Type | Hydraulic |
| Connector | 4-pin PWM |
| Voltage | 12 V DC |
| Power Consumption | 3.6 W (max) |
| Net Weight | 650 g (approx.) |
| Dimensions | 126 mm x 160 mm x 155 mm (W x H x D) |
| Estimated Lifespan | 50,000 hours |
| Maintenance | Clean with compressed air or soft brush |
| Safety Note | Ensure secure mounting and proper clearances |
| Removable Parts | Fan and fan clips are replaceable |
| Warranty | 2 years (depending on region) |
Frequently Asked Questions - JET Stand NGS
Is the NGS JET Stand CPU cooler compatible with my Intel processor?
The NGS JET Stand supports most modern Intel sockets including LGA 1700, LGA 1200, and LGA 115x. Check your motherboard socket type before purchase.
How do I install the NGS JET Stand cooler?
First apply thermal paste to the CPU, then align the mounting brackets with your socket, secure the cooler with the provided screws, and finally connect the 4-pin PWM fan to the motherboard CPU fan header.
What thermal paste should I use?
The cooler comes with a pre-applied thermal compound. If you reinstall, use a high-quality paste like Arctic MX-4 or Noctua NT-H1.
Why is my cooler making noise?
Noise can be due to high fan speed, dust accumulation, or a loose wire. Clean the fan blades and check the PWM curve in the BIOS. The noise level ranges from 20 to 35 dBA.
Can I control the fan speed automatically?
Yes, the 4-pin PWM connector allows the motherboard to automatically adjust the fan speed from 800 to 1800 RPM based on CPU temperature.
Does the NGS JET Stand support AMD AM5 sockets?
Yes, it includes compatibility with AM5 and AM4 sockets. Use the appropriate mounting kit for your platform.
How often should I clean my CPU cooler?
It is recommended to clean the cooler every 3 to 6 months. Use compressed air to remove dust from the fins and fan to maintain optimal cooling performance.
What is the maximum cooling performance?
The cooler is designed for CPUs with a TDP up to 160W. It offers a maximum airflow of 65 CFM, making it suitable for mid-range gaming builds.
Can I replace the fan if it fails?
Yes, the fan is replaceable. You can purchase a standard 120mm PWM fan and attach it to the heatsink using the included clips.
Is the NGS JET Stand easy to install in a small form factor case?
With dimensions of 126 x 160 x 155 mm, the cooler fits most mid-tower cases. Always verify the case CPU cooler height limit (often 155mm) before installation.
User questions about JET Stand NGS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your CPU Cooler in PDF format for free! Find your manual JET Stand - NGS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JET Stand by NGS.
USER MANUAL JET Stand NGS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NGS
Model : JET Stand
Category : CPU Cooler