Archer C20W - Router TP-LINK - Free user manual and instructions
Find the device manual for free Archer C20W TP-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless router |
| Brand | TP-Link |
| Model | Archer C20W |
| Wireless Standard | IEEE 802.11a/b/g/n/ac |
| Frequency Band | Dual band 2.4 GHz and 5 GHz |
| Maximum Wireless Speed | AC750 (300 Mbps on 2.4 GHz + 433 Mbps on 5 GHz) |
| Antennas | 2 fixed external antennas, 5 dBi |
| Ports | 4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN |
| Buttons | Power, WPS, Reset |
| Operation Modes | Wireless Router, Access Point, Range Extender |
| Security | WEP, WPA, WPA2, WPA-Mixed, WPS push button |
| Management | Web interface, DHCP, QoS, IPTV, Guest network |
| Dimensions | 230 x 144 x 35 mm |
| Weight | Approx. 300 g |
| Power Supply | DC 9 V, 0.6 A external adapter |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) |
| Maintenance and Cleaning | Clean with a soft dry cloth; do not use solvents or water |
| Spare Parts and Repairability | No user-serviceable parts; contact TP-Link support for repairs |
| General Information | For home and small office use, quick setup via tplinkwifi.net |
Frequently Asked Questions - Archer C20W TP-LINK
How do I set up the Archer C20W router?
Connect the router to power, then connect the WAN port of the router to your modem using an Ethernet cable. Open http://tplinkwifi.net in a web browser and follow the Quick Setup wizard to configure internet connection and Wi-Fi.
How do I change my Wi-Fi password?
Log in to the web interface, go to Wireless Settings, set a new SSID and passphrase under WPA/WPA2, then save the settings. Reconnect your devices using the new credentials.
How do I reset the router to factory defaults?
With the router powered on, use a pin to press and hold the Reset button for about 10 seconds until the power LED blinks. The router will reboot with all settings restored to factory defaults.
What is the default IP address and login?
The default IP is 192.168.0.1 and the web management address is http://tplinkwifi.net. The default username and password are both admin (lowercase).
How do I update the firmware?
Download the newest firmware from TP-Link's official support page, log into the web UI, go to System Tools -> Firmware Upgrade, choose the downloaded file, and click Upgrade. Do not disconnect the power during the update.
How can I improve my wireless signal strength?
Place the router in a central, elevated position away from thick walls and metal appliances. Adjust both antennas vertically, select a less congested Wi-Fi channel, and consider enabling QoS to prioritize critical applications.
How do I set up a guest network?
In the web interface, go to Guest Network, enable it, choose a network name and security mode, then set a password. Guest devices will be isolated from your main local network.
Can the Archer C20W be used as an access point or range extender?
Yes. The router supports Wireless Router, Access Point, and Range Extender modes. You can switch the operation mode through the Quick Setup wizard or the System Tools menu.
What should I do if I forget my login password?
Perform a factory reset by holding the Reset button for 10 seconds. The router restarts with the factory default username and password (admin/admin), but you will need to reconfigure it.
What are the power and environmental requirements?
The router uses a 9V DC 0.6A adapter. It operates within a temperature range of 0°C to 40°C and should be kept in a dry, ventilated area away from direct sunlight.
User questions about Archer C20W TP-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual Archer C20W - TP-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Archer C20W by TP-LINK.