M5163dn - Printer LEXMARK - Free user manual and instructions
Find the device manual for free M5163dn LEXMARK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monochrome Laser Printer |
| Brand | Lexmark |
| Model | M5163dn |
| Functions | |
| Print Resolution | Up to 1200 x 1200 dpi |
| Print Speed (A4) | Up to 43 ppm |
| Duplex Printing | Yes (automatic) |
| Processor Speed | 1.0 GHz |
| Memory | 512 MB (expandable to 2.5 GB) |
| Display | 2.4-inch color display |
| Network Connectivity | Ethernet 10/100/1000 Base TX |
| USB Ports | USB 2.0 Hi-Speed Type A and Type B |
| Standard Paper Capacity | 250 sheets |
| Maximum Paper Capacity | 900 sheets |
| Paper Sizes | A4, A5, A6, B5, Letter, Legal, Executive, Folio |
| Media Weight | 60 to 216 g/m² |
| Monthly Duty Cycle | Up to 100,000 pages |
| Recommended Monthly Volume | 2,000 to 15,000 pages |
| Dimensions (W x D x H) | 438 x 400 x 348 mm |
| Weight | 17.1 kg |
| Power Consumption | 550 W (average), 5 W (sleep), 1.5 W (hibernate) |
| Noise Level | Max 55 dB (operating) |
| Security Features | Secure Print, PIN release, IP Security, SSL/TLS |
| Maintenance | Replace toner cartridge, clean fuser and rollers |
| Repairability | Modular components, accessible toner and imaging unit |
Frequently Asked Questions - M5163dn LEXMARK
How do I load paper into the standard tray?
Pull the tray out of the printer. Adjust the paper guides to match the paper size. Flick the paper stack to align the edges, then place it into the tray with the print side facing down. Ensure the paper is below the maximum fill line. Slide the tray back into the printer until it clicks.
How do I replace the toner cartridge?
Open the front access cover. Remove the old toner cartridge by pulling it out. Unpack the new cartridge and shake it gently to distribute the toner. Insert it into the slot with the arrow pointing inward. Push until it clicks into place, then close the cover. The printer performs a quick calibration.
How can I print on both sides of the paper (duplex)?
From your computer, open the Print dialog and select Properties or Preferences. In the layout or finishing tab, choose Print on Both Sides or Duplex. For manual duplex, you may be prompted to reinsert the paper. The M5163dn has an automatic duplexer for effortless two-sided printing.
How do I connect the printer to an Ethernet network?
Connect an Ethernet cable from the printer's network port to your router or switch. On the printer control panel, go to Settings > Network > Wired and ensure Ethernet is enabled. The printer will obtain an IP address via DHCP. Print a network setup page to confirm connectivity.
How do I find the printer's IP address?
On the printer control panel, navigate to Settings > Network/Ports > Network Overview. The IP address is displayed there. Alternatively, print a network setup page from the settings menu or from a computer using the driver's status window.
How do I clear a paper jam?
Locate the jam by opening the front cover and checking the fuser area. Gently pull the paper out in the direction of the paper path. Check the tray and output bin. If any torn pieces remain, remove them carefully. Then close the cover and press the continue button. Avoid using tweezers that could damage the rollers.
How can I reduce the printer's energy consumption?
Use the Power Saver mode. Go to Settings > General > Energy Saving and set the sleep timer to 1 minute. Also, enable Hibernate after 30 minutes. The printer automatically wakes when it receives print jobs.
How do I print from a mobile device?
The printer supports Mopria and AirPrint. Connect your mobile device to the same network as the printer. On Android, enable Mopria Print Service in the service menu. On iOS, select AirPrint in the share menu. The printer will appear automatically.
What types of paper can I use in the printer?
The printer accepts a wide range of media, including plain paper, recycled paper, envelopes, transparencies, labels, and cardstock. Recommended weight is 60 to 216 g/m². For best results, use paper that meets Lexmark's recommended media and always test new media for compatibility.
How do I update the printer firmware?
Download the latest firmware from the Lexmark Support website. In the printer's embedded web server (enter its IP address in a browser), go to Settings > Device Updates and upload the firmware file. Alternatively, use a USB drive via the front port. The printer restarts automatically after the update.
User questions about M5163dn LEXMARK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual M5163dn - LEXMARK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M5163dn by LEXMARK.
USER MANUAL M5163dn LEXMARK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LEXMARK
Model : M5163dn
Category : Printer