X204 - Printer LEXMARK - Free user manual and instructions
Find the device manual for free X204 LEXMARK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multifunction Monochrome Laser Printer |
| Functions | Print, Copy, Scan, Optional Fax |
| Print Resolution | Up to 1200 x 1200 dpi |
| Print Speed | Up to 24 pages per minute |
| Processor Speed | 400 MHz |
| Memory | 128 MB standard (expandable to 640 MB) |
| Paper Input Capacity | 250-sheet tray plus 1-sheet multipurpose feeder |
| Paper Output Capacity | 100-sheet standard output bin |
| Media Supported | Plain paper, envelopes, labels, card stock, transparencies |
| Connectivity | USB 2.0, Ethernet 10/100 Base-TX |
| Display | 2-line monochrome LCD |
| Dimensions (W x D x H) | 419 x 365 x 389 mm (16.5 x 14.4 x 15.3 inches) |
| Weight | 11.5 kg (25.4 lbs) |
| Power Supply | 220-240 V AC, 50/60 Hz |
| Power Consumption | Average 550 W during printing, 20 W in sleep mode |
| Maintenance and Cleaning | Clean the exterior with a soft, dry cloth; use only recommended toner and imaging units |
| Safety Precautions | Do not expose to moisture; use a grounded power outlet; avoid blocking vents |
| Repairability and Parts | Replaceable toner cartridge, imaging unit, and internal tray; user-replaceable fuser |
| General Information | Monthly duty cycle up to 10,000 pages; supports Windows, macOS, and Linux |
Frequently Asked Questions - X204 LEXMARK
How do I load paper into the Lexmark X204?
Open the input tray and adjust the paper width guides to match the paper size. Fan the paper stack and place it in the tray with the printable side facing up. Adjust the guides snugly against the paper, then close the tray. For the multipurpose feeder, insert a sheet or envelopes directly.
What toner cartridge does the Lexmark X204 use?
The Lexmark X204 uses the Lexmark 54A series toner cartridges. You can purchase standard or high-yield versions. Always install a genuine Lexmark cartridge for optimal print quality.
How can I clear a paper jam in the printer?
Power off the printer and open the front cover. Gently pull out the toner cartridge and check for jammed paper in the paper path, rollers, and fuser area. Remove any stuck paper carefully, reinstall the toner cartridge, and close the cover. Power on the printer and send a test print.
How do I connect the Lexmark X204 to a Wi-Fi network?
The X204 does not have built-in Wi-Fi, but it supports Ethernet networking. Connect an Ethernet cable to the printer's network port and your router. Then use the printer's control panel to set an IP address via DHCP, or install drivers and use the Lexmark printer utility for configuration.
Can I scan documents without a computer?
Yes, the Lexmark X204 is a multifunction printer that supports standalone scanning. Place your document on the scanner glass, press the Scan button on the control panel, and select the destination (e.g., USB drive, network folder, or email). Follow the on-screen prompts.
How do I replace the imaging unit?
Open the front cover and remove the toner cartridge. The imaging unit is usually the green drum. Release the locking lever, lift the imaging unit out, and insert a new one. Align the arrows and snap it into place. Reinstall the toner cartridge and close the cover. Reset the counter if prompted.
Why is the printer printing light or faded text?
Light print often indicates a low toner cartridge or a worn imaging unit. First check the toner level and replace if empty. You can also clean the corona wire inside the toner cartridge using the cleaning tab. If the issue persists, replace the imaging unit.
How do I restore factory default settings?
Press the Menu button on the control panel. Navigate to Settings > Restore Defaults. Select Restore and confirm. This will reset all settings to their original factory values, including network settings.
What type of paper is recommended?
The Lexmark X204 works best with plain 75 g/m² to 90 g/m² paper. Use laser-compatible labels, transparencies, and cardstock. Avoid coated or rough paper that may cause jams or poor print quality. Store paper in a dry place.
How do I perform a print head cleaning?
On the control panel, go to Maintenance > Clean Print Head. The printer will run a cleaning cycle using internal cleaning tools. This is typical for laser printers and helps remove toner residue. Run a test page afterward to verify.
User questions about X204 LEXMARK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual X204 - LEXMARK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. X204 by LEXMARK.
USER MANUAL X204 LEXMARK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LEXMARK
Model : X204
Category : Printer