Bracelet - Smartwatch Highlink - Free user manual and instructions
Find the device manual for free Bracelet Highlink in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smartwatch |
| Brand | Highlink |
| Model | Bracelet |
| Dimensions | Approximately 40 x 40 x 10 mm |
| Weight | Approximately 50 g |
| Battery Capacity | 150 mAh lithium-ion polymer |
| Charging Method | Magnetic charging cable with 2-pin connector |
| Display Type | 1.28-inch TFT LCD touchscreen |
| Resolution | 240 x 240 pixels |
| Connectivity | Bluetooth 5.0 |
| Sensor | Heart rate monitor, 3-axis accelerometer |
| Water Resistance | IP68 (immersion up to 1.5m for 30 minutes) |
| Compatibility | iOS 9.0 or later, Android 4.4 or later |
| Operating System | Proprietary RTOS |
| Band Material | Soft silicone, replaceable (standard 20mm width) |
| Main Functions | Step counter, distance, calorie tracking; sleep monitoring; heart rate measurement; call and message notifications; alarm; stopwatch; sedentary reminder; camera remote control |
| Battery Life | 7-10 days typical use |
| Charging Time | Approximately 2 hours |
| Cleaning and Care | Wipe with a soft, damp cloth; avoid abrasive or solvent-based cleaners. Remove the device from the band before cleaning the band with mild soap and water. |
| Safety Warnings | Not a medical device. Do not use while charging. Keep away from extreme heat. Consult a doctor if you have a pacemaker or other implanted device. |
| Spare Parts Availability | Replacement bands can be purchased separately. The battery is internal and not user-replaceable. |
| Repair Information | Contact Highlink support for service. Do not disassemble the device. |
| General Information | Highlink Bracelet smartwatch for daily fitness tracking and notifications. Download the companion app "FitCloudPro" from App Store or Google Play. |
Frequently Asked Questions - Bracelet Highlink
How do I pair the Highlink Bracelet with my phone?
Download and install the FitCloudPro app from the App Store (iOS) or Google Play (Android). Enable Bluetooth on your phone. Open the app, create an account or log in, then tap 'Add Device' and select 'Highlink Bracelet' from the list. Confirm pairing when prompted.
How do I charge the smartwatch?
Use the included magnetic charging cable. Attach the cable's connector to the contact pins on the back of the watch until it snaps into place. Plug the USB end into a power adapter (5V/1A) or computer USB port. The screen will show a battery icon while charging.
Is the Highlink Bracelet waterproof?
The device has an IP68 rating, meaning it is dust-tight and can be submerged in up to 1.5 meters of water for 30 minutes. It is suitable for swimming but not for diving or hot water (e.g., shower or sauna). Dry the device thoroughly after water contact.
How do I clean the watch and band?
Wipe the watch body with a soft, damp cloth. Avoid using sharp objects or abrasive cleaners. To clean the silicone band, remove it from the watch and wash with mild soap and water, then rinse and dry completely before reattaching.
How do I measure my heart rate?
Ensure the watch is worn snugly on your wrist, about a finger's width above the wrist bone. Go to the heart rate app on the watch and tap to start measurement. The optical heart rate sensor will activate. Remain still during measurement. Results appear after a few seconds.
Can I receive phone calls and messages on the watch?
Yes, the watch can display call and message notifications from your smartphone when connected via Bluetooth. Incoming calls will show the caller ID, and you can reject calls (but not answer). Message previews can be read but not replied to.
How do I change the watch band?
Locate the small quick-release pin on the back of the band near the watch case. Use the release tool or a fingernail to slide the pin inward. Remove the band from the lug. Slide a new standard 20mm band with quick-release pins into place until the pin clicks.
How do I reset the watch to factory settings?
On the watch, go to Settings > Reset (or Factory Reset). Confirm the action. Alternatively, from the FitCloudPro app, go to device settings and select 'Unpair' to reset and disconnect. The watch will reboot and lose all paired data.
Why is my step count not accurate?
Step accuracy is improved when the watch is worn on the non-dominant wrist and updated with your personal profile (height, weight, step length) in the FitCloudPro app. Arm movements while not walking may cause miscounts. Calibrate by walking a known distance in the app.
How do I enable sleep tracking?
Sleep tracking is automatic when the watch detects that you are asleep (typically between 9 PM and 9 AM). Wear the watch to bed. Data syncs to the FitCloudPro app in the morning. For best results, ensure the watch is not too loose and that your sleep schedule is consistent.
User questions about Bracelet Highlink
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smartwatch in PDF format for free! Find your manual Bracelet - Highlink and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bracelet by Highlink.
USER MANUAL Bracelet Highlink
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Highlink
Model : Bracelet
Category : Smartwatch