G2T - Air conditioner Highlink - Free user manual and instructions
Find the device manual for free G2T Highlink in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | Highlink |
| Model | G2T |
| Cooling Capacity | 12000 BTU/h |
| Power Consumption | 1200 W |
| Energy Efficiency | Class A |
| Operating Modes | Cool, Fan, Dehumidify |
| Thermostat | Adjustable, 16-30°C |
| Timer | 1-24 hours |
| Remote Control | Included |
| Airflow | 3 speeds |
| Dimensions (WxDxH) | 70 x 35 x 40 cm |
| Weight | 25 kg |
| Noise Level | 65 dB max |
| Refrigerant | R-410A |
| Exhaust Hose Length | 1.5 m |
| Water Drainage | Continuous or manual |
| Filter | Washable mesh filter |
| Maintenance | Clean filter every 2 weeks |
| Safety Features | Overload protection, auto restart |
| Spare Parts Available | Filter, remote control, hose |
| Warranty | 2 years |
Frequently Asked Questions - G2T Highlink
How do I clean the air filter?
Turn off and unplug the unit. Remove the filter cover, take out the mesh filter, and wash it with warm water and mild detergent. Let it dry completely before reinstalling. Clean every 2 weeks for optimal performance.
How do I set the timer?
Press the Timer button on the remote or control panel. Use the +/- buttons to set the desired hours (1-24). Confirm with the Timer button again. The unit will turn off automatically after the set time.
Why is my air conditioner not cooling?
Check if the filter is dirty and clean it. Ensure the exhaust hose is properly connected and not blocked. Make sure the room size matches the unit's capacity. Check if the set temperature is lower than room temperature.
What do the error codes mean?
Common error codes: E1 (room sensor failure), E2 (coil sensor failure), E3 (condenser temp high), E4 (overflow protection). Refer to the manual for detailed troubleshooting. If persist, contact support.
How to use the remote control?
Insert 2 AAA batteries. Point the remote at the unit's receiver. Press Power to turn on/off. Use Mode to select Cool, Fan, or Dry. Adjust temperature with +/- and fan speed with Fan button.
How do I drain water from the unit?
In humid mode, water collects in the internal tank. When full, a warning appears. Remove the drain plug at the back, attach a hose, and let water flow to a floor drain. Alternatively, use continuous drain option.
Can I use an extension cord?
No, do not use an extension cord. Plug the air conditioner directly into a grounded wall outlet. Using an extension cord may cause voltage drop and overheating.
How loud is the unit?
The noise level is approximately 65 dB at maximum speed, similar to a conversation or background music. Lower speeds are quieter. It is normal for a portable air conditioner.
How to install the exhaust hose?
Attach the hose connector to the back of the unit. Extend the hose to the window and secure with the window seal kit. Ensure no kinks or bends. The hose must be at least 30 cm away from obstacles.
What is the warranty coverage?
The Highlink G2T comes with a 2-year limited warranty covering manufacturing defects. It does not cover damage from misuse, unauthorized repairs, or normal wear. Keep your purchase receipt.
User questions about G2T Highlink
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual G2T - Highlink and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G2T by Highlink.
USER MANUAL G2T Highlink
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Highlink
Model : G2T
Category : Air conditioner