CPS2 - Compressor BLACK & DECKER - Free user manual and instructions
Find the device manual for free CPS2 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Compressor |
| Brand | Black & Decker |
| Model | CPS2 |
| Power Source | 120V AC, 60 Hz |
| Motor Power | 0.5 HP |
| Tank Capacity | 2 Gallons (7.6 L) |
| Maximum Pressure | 100 PSI (6.9 bar) |
| Air Flow (SCFM at 40 PSI) | 2.0 SCFM |
| Air Flow (SCFM at 90 PSI) | 1.1 SCFM |
| Dimensions (L x W x H) | 15 x 12 x 13 inches (38 x 30 x 33 cm) |
| Weight | 25 lbs (11.3 kg) |
| Noise Level | 78 dB(A) |
| Lubrication | Oil-free pump |
| Regulator | Dual gauge regulator |
| Safety Valve | Yes, automatic |
| Thermal Overload Protection | Yes |
| Maintenance | Drain tank after use; clean air filter monthly |
| Cleaning | Wipe exterior with damp cloth |
| Replacement Parts | Filters, pressure switch, hose connectors |
| Warranty | 2 years limited |
Frequently Asked Questions - CPS2 BLACK & DECKER
How do I change the oil on the Black & Decker CPS2 compressor?
The Black & Decker CPS2 is an oil-free compressor, so no oil change is needed. Simply drain the tank after each use to prevent moisture buildup.
Why won't my CPS2 compressor build up pressure?
Check for air leaks in the hose or connections. Ensure the drain valve is fully closed. Also inspect the pressure switch and check valve. If the motor runs but no pressure, the pump may need service.
What is the maximum pressure of the CPS2?
The maximum pressure is 100 PSI. Do not exceed this limit to avoid safety risks.
How do I drain the air tank on the CPS2?
After use, turn off the compressor and release all pressure. Open the drain valve at the bottom of the tank to let out condensation. Leave it open until water stops dripping.
Can I use an extension cord with the CPS2?
Yes, but use a heavy-duty 12 AWG extension cord no longer than 50 feet to avoid voltage drop. Ensure the cord is rated for outdoor use.
What accessories are compatible with the Black & Decker CPS2?
This compressor works with standard 1/4-inch quick-connect fittings. Common accessories include tire inflators, brad nailers, and blow guns.
How often should I clean the air filter?
Clean the air filter every month or more often in dusty conditions. Remove the filter cover, wash the foam with mild soap, dry thoroughly, and reinstall.
Why is my CPS2 compressor cycling on and off rapidly?
This could be due to a leak in the system or a faulty pressure switch. Tighten all connections. If the problem persists, replace the pressure switch.
What is the noise level of the CPS2 compressor?
The noise level is approximately 78 dB(A), similar to a typical vacuum cleaner. Use ear protection for extended use.
Where can I find replacement parts for the CPS2?
Replacement parts such as air filters, pressure switches, and drain valves are available through Black & Decker service centers or online retailers.
User questions about CPS2 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual CPS2 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CPS2 by BLACK & DECKER.