CP2525 - Compressor BLACK & DECKER - Free user manual and instructions
Find the device manual for free CP2525 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Compressor |
| Brand | Black & Decker |
| Model | CP2525 |
| Tank Capacity | 2.5 gal (9.5 L) |
| Motor Power | 1.5 HP (peak) |
| Max Pressure | 100 PSI (6.9 bar) |
| Air Flow | 2.0 CFM @ 90 PSI |
| Pump Type | Oil-free |
| Voltage | 120 V |
| Frequency | 60 Hz |
| Power Cord Length | 6 ft (1.8 m) |
| Weight | 25 lbs (11.3 kg) |
| Dimensions (L x W x H) | 15 x 12 x 17 in (38 x 30 x 43 cm) |
| Noise Level | 78 dB (A) |
| Thermal Overload Protection | Yes |
| Regulator Gauge | Dual gauges (tank & outlet) |
| Safety Valve | Yes |
| Quick Coupler | 1/4 in NPT |
| Built-in Handle | Yes, foldable |
| Rubber Feet | Anti-vibration |
| Certifications | ETL, CSA |
| Warranty | 1 year limited |
Frequently Asked Questions - CP2525 BLACK & DECKER
How do I start the compressor?
Ensure the power switch is OFF. Plug the compressor into a grounded outlet. Turn the drain valve closed. Open the regulator by turning knob clockwise. Then, turn the power switch to ON. The compressor will start and build pressure until it reaches the cut-out pressure.
Why does the compressor cycle on and off rapidly?
Rapid cycling may be due to a small air leak. Check all connections, hoses, and the quick coupler for leaks. Also, ensure the regulator knob is fully open. If the problem persists, the check valve may be faulty.
How do I drain the tank?
After each use, release all pressure from the tank by pulling the safety valve or opening a connected tool. Then, open the drain valve at the bottom of the tank to expel condensation. Tilt the compressor slightly to ensure complete drainage.
What type of oil does the pump require?
The CP2525 features an oil-free pump, so no oil is required. This reduces maintenance and eliminates oil spill risks.
Can I use an extension cord?
Yes, but use a heavy-duty extension cord rated for 15 amps or more. Keep the cord as short as possible, and ensure it is fully uncoiled to prevent overheating.
What is the maximum operating temperature?
The compressor is designed for ambient temperatures between 32°F (0°C) and 100°F (38°C). Do not operate in freezing conditions or in direct sunlight.
How do I adjust the pressure?
Turn the regulator knob clockwise to increase pressure and counterclockwise to decrease. The outlet gauge shows the regulated pressure. The tank gauge shows the tank pressure.
The compressor won't start. What should I check?
First, check the power cord and outlet. If both are fine, let the motor cool if thermal overload protection has tripped. Also check the pressure switch: if the tank is above cut-in pressure, the compressor will not start until pressure drops.
How often should I clean the air filter?
Inspect the air filter every 50 hours of operation or monthly. Clean with soapy water if dirty, and allow it to dry completely before reinstalling. Replace if damaged.
What safety precautions should I take?
Always wear safety goggles when operating. Never point the air stream at people or pets. Use only accessories rated for at least the compressor's maximum pressure. Depressurize the tank before servicing.
User questions about CP2525 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual CP2525 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CP2525 by BLACK & DECKER.
USER MANUAL CP2525 BLACK & DECKER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BLACK & DECKER
Model : CP2525
Category : Compressor