RM-260 - Remote control Steren - Free user manual and instructions
Find the device manual for free RM-260 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Remote Control |
| Brand | Steren |
| Model | RM-260 |
| Compatibility | Universal |
| Signal Type | Infrared (IR) |
| Range | Up to 8 meters |
| Power Source | 2 x AAA batteries (not included) |
| Dimensions (L x W x H) | Approx. 15 x 5 x 2 cm |
| Weight | ~80 g (without batteries) |
| Number of Keys | 30+ |
| Programming | Manual code entry or auto-search |
| Supported Devices | TV, DVD, VCR, Satellite, Cable, etc. |
| Learning Function | Yes |
| Backlit Keys | No |
| Color | Black |
| Material | ABS Plastic |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use liquids. |
| Battery Life | Approx. 6-12 months with normal use |
| Spare Parts Available | Replacement batteries only (not included) |
| Repairability | Non-repairable; replace if defective |
| Safety Warnings | Keep away from water and heat sources. Do not disassemble. |
Frequently Asked Questions - RM-260 Steren
How do I program the Steren RM-260 remote?
Turn on the device. Press and hold the SETUP key until the LED blinks. Enter the 3-digit code for your device brand from the code list. If the code is correct, the LED will turn off. Test the remote with the device.
What batteries does the RM-260 use?
The remote uses 2 AAA batteries (not included). Always replace both batteries at the same time and remove them if the remote will not be used for a long period.
How do I perform an auto-search for codes?
Press and hold SETUP until LED blinks. Press the device key (e.g., TV). Press CH+ repeatedly until the device turns off. Press ENTER to save the code.
The remote is not working at all. What should I check?
First, check that the batteries are fresh and inserted correctly (+/-). Ensure the IR lens is clean and unobstructed. Point the remote directly at the device within 8 meters. Try resetting by removing batteries for 10 seconds.
Can this remote control multiple devices?
Yes, the RM-260 can control up to 4 different devices (e.g., TV, DVD, STB, Aux). You need to program each device separately using the corresponding device key.
What devices are compatible with the RM-260?
It is compatible with most brands of TVs, DVD players, VCRs, satellite receivers, and cable boxes. Check the included code list or use the auto-search function.
How do I clean the remote control?
Wipe the exterior with a dry, soft cloth. Do not use water, cleaning solvents, or abrasive pads. For stains, lightly dampen the cloth with water and wipe immediately.
What should I do if a key is stuck?
Remove the batteries. Gently tap the remote to dislodge any debris. Use a soft brush to clean around the stuck key. If it persists, the remote may need replacement.
Does the remote have a learning function?
Yes, the RM-260 has a learning function. To use it, place the remotes head-to-head and follow the programming steps in the manual.
Where can I find the code list for my device?
The code list is included in the printed manual or can be downloaded from the Steren website. If you don't have it, use the auto-search function.
User questions about RM-260 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote control in PDF format for free! Find your manual RM-260 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RM-260 by Steren.
USER MANUAL RM-260 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : RM-260
Category : Remote control