ALA-2010 - Remote control Steren - Free user manual and instructions

Product Type	Remote Control
Brand	Steren
Model	ALA-2010
Dimensions (L x W x H)	200 mm x 50 mm x 25 mm
Weight	100 g (with batteries)
Power Source	2 x AAA batteries (not included)
Compatible Devices	TV, DVD, Blu-ray, Satellite, Cable Box, Streaming Devices
Control Type	Infrared (IR)
Number of Keys	30
Programming Method	Direct code entry or auto-search
Battery Life	Approximately 6 months with normal use
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use liquids or abrasive cleaners.
Storage Temperature	-10°C to 50°C
Operating Temperature	0°C to 40°C
Safety Precautions	Keep away from water and excessive heat. Do not attempt to disassemble.
Spare Parts Availability	Batteries only. Standard AAA batteries available anywhere.
Color	Black
Range	Up to 10 meters
Warranty	1 year limited

Frequently Asked Questions - ALA-2010 Steren

How do I program the Steren ALA-2010 remote control to my TV?

To program the remote, turn on your TV, press and hold the SETUP key until the LED blinks, then enter the 4-digit code from the code list. If no code works, use the auto-search method: press SETUP, then POWER repeatedly until the TV turns off.

What batteries does the ALA-2010 use?

The remote requires 2 AAA batteries (not included). Insert them with correct polarity as shown inside the battery compartment.

Why is my remote not working?

First, check that the batteries are fresh and properly inserted. Ensure no obstacles block the IR signal between remote and device. Try resetting the remote by removing batteries for 30 seconds. If problem persists, reprogram the remote.

Can I use this remote for multiple devices?

Yes, the ALA-2010 can control up to 4 devices (e.g., TV, DVD, satellite, soundbar). Use the DEVICE key to switch between modes.

Where can I find the code list for my device?

The code list is included in the user manual. You can also download it from the Steren website or contact customer support for assistance.

How do I clean the remote?

Unplug batteries and wipe the remote with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Avoid getting moisture into the buttons.

Is the remote compatible with all TV brands?

The remote works with most major brands including Samsung, LG, Sony, Panasonic, Vizio, and many more. Check the code list for your brand. Some older or less common brands may not be supported.

What does the 'MUTE' button do?

The MUTE button turns off the sound of the currently selected device. Press it again to restore sound.

How can I reset the remote to factory settings?

Remove the batteries, press and hold any key for 10 seconds, then reinsert batteries. This clears all programmed codes and resets the remote to default.

Does the remote have backlight?

No, the ALA-2010 does not have a backlight. Buttons are visible in ambient light. Consider using a light source for use in dark rooms.

USER MANUAL ALA-2010 Steren

ALA-2010

Control adicional para ALA-2000

V0.0/0718v

IMPORTANTE

Simple line drawing of a smartphone with a screwdriver inserted (no text or symbols)

Simple 3D diagram of a device with a speech bubble and a button, no text or symbols present

ESPECIFICACIONES

Additional control for ALA-2000

V0.0/0718v

IMPORTANT

Before to use the product, please read carefully this manual to avoid any malfunction.

The info in this manual is shown as reference. Consult our website www.steren.com to obtain the current version of this manual.

CAUTIONS

• The children should be supervised to ensure that don't use it like a toy.
- This device is not designed for be using by people (including children) with physical capacities, sensorial or mental reduced, or they don't have the necessary experience or knowledge.
- Avoid the drops may cause serious damages.

The operation of this equipment is subject to the following two conditions: (1) it is possible that this equipment or device may not cause harmful interference and (2) this equipment or device must accept any interference, including interference that may cause its undesired operation.

BATTERY REPLACEMENT

Simple line drawing of a smartphone with a screwdriver inserted (no text or symbols)

1. Remove the screw and open the control.

2. Carefully remove the plate from the control.

With a pointed object remove the battery and replace it for a same features

(CR2032). Pay attention in the polarity.

1. Place the plate in the control and place the cover again, screw it firmly.

Simple 3D diagram of a device with a speech bubble and two components (no text or symbols)

SPECIFICATIONS

Input: 3 V --- (CR2032)

Operating frequency: 315 MHz

Operating temperature: -20 °C to +55 °C

Storage temperature: - 40 °C to 70 °C

RH: 40% to 80%

Specifications may change without previous notice

ALARM PAIRING

1. Slide the switch to the ON position. You will hear a tone and the LED of the blinking light, will flashing once.
2. Press once the setting button. The LED of the blinking light, will flashing.
3. Wait for 3 seconds, in the remote control press SOS button. If the pairing is success the LED of the blinking light, will flashing once.
4. Press the setting button 4 times. The LED of the blinking light, will turn on one by one, repeat this process until the LED power off.

HOW TO USE

With the alarm connected into an outlet:

Press SOS to activate the alarm

Press & to deactivate the alarm