AMP-210SD - Receiver Steren - Free user manual and instructions
Find the device manual for free AMP-210SD Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Steren |
| Model | AMP-210SD |
| Product Type | Audio/Video Receiver |
| Dimensions (W x D x H) | 430 mm x 250 mm x 60 mm |
| Weight | 2.5 kg |
| Power Supply | AC 120V, 60 Hz |
| Power Consumption | 45 W |
| Audio Output Power | 2 x 50 W (RMS) at 8 ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Inputs | 3x RCA, 1x Optical, 1x Coaxial, 1x Bluetooth |
| Outputs | Speaker terminals (2 channels), 1x Subwoofer Pre-out |
| Radio Tuner | FM with 30 presets |
| Key Functions | Volume, Source, Menu, Mute, Preset |
| Display | LED segment display |
| Remote Control | IR remote with batteries included |
| Maintenance | Wipe with dry cloth; avoid liquids |
| Safety | Do not expose to moisture; unplug during storms |
| Spare Parts and Repairability | Contact authorized service center for parts |
| Additional Information | Bluetooth version 4.2, supported formats: MP3, WMA |
Frequently Asked Questions - AMP-210SD Steren
How do I connect the receiver to my TV?
Use an optical or coaxial cable from your TV's audio output to the corresponding input on the receiver. Ensure the TV audio output is set to PCM.
Can I pair my smartphone via Bluetooth?
Yes. Press the Source button until Bluetooth appears on the display. Then, enable Bluetooth on your phone and select 'AMP-210SD' from the list.
What is the maximum power output?
The receiver delivers 2 x 50 Watts RMS at 8 ohms, suitable for most bookshelf speakers.
How do I reset the receiver to factory settings?
Turn off the receiver, then press and hold the 'Menu' button while turning it on. Release when the display shows 'RESET'.
Does the receiver support surround sound?
No, this is a 2.1 channel receiver. It supports stereo with a subwoofer output for enhanced bass.
Why is there no sound from my speakers?
Check that the speakers are properly connected to the terminals, the receiver is set to the correct input, and the mute function is off. Also verify the volume is turned up.
How do I program FM radio presets?
Tune to a desired station using the 'Tune +' or 'Tune -' buttons, then press and hold a number button (0-9) to save the preset.
Can I use the receiver with a subwoofer?
Yes, connect a powered subwoofer to the 'Subwoofer Pre-out' jack on the back panel.
What are the dimensions of the receiver?
Approximately 430 mm wide, 250 mm deep, and 60 mm high. Ensure proper ventilation around the device.
How do I clean and maintain the receiver?
Use a soft, dry cloth to wipe the exterior. Do not use chemical cleaners or spray liquids directly. Keep ventilation grills free of dust.
User questions about AMP-210SD Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual AMP-210SD - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AMP-210SD by Steren.
USER MANUAL AMP-210SD Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : AMP-210SD
Category : Receiver