ICF-C120 - Alarm Clock SONY - Free user manual and instructions
Find the device manual for free ICF-C120 SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Alarm Clock Radio |
| Brand | Sony |
| Model | ICF-C120 |
| Power Source | AC 120V 60Hz; DC 9V backup battery |
| Display Type | LED digital display |
| Radio Bands | FM, AM |
| Alarm | Dual alarm with buzzer or radio |
| Snooze | Snooze function (9 minutes) |
| Sleep Timer | Sleep timer (up to 60 minutes) |
| Backup Battery | 9V battery for time and alarm backup |
| Dimensions (approx.) | 15 x 8 x 5 cm (5.9 x 3.1 x 2.0 in) |
| Weight (approx.) | 500 g (1.1 lb) |
| Material | Plastic |
| Color | Black |
| Cleaning | Use a soft dry cloth; avoid liquids and abrasives. |
| Safety | Do not expose to water or moisture; unplug during electrical storms. |
| Repairability / Parts | Parts available through Sony authorized service centers. |
Frequently Asked Questions - ICF-C120 SONY
How do I set the alarm time?
Press and hold the ALARM SET button until the display flashes. Use the HOUR and MINUTE buttons to set the desired time. Press ALARM SET again to save.
How do I set the clock time?
Press and hold the CLOCK SET button until the display flashes. Adjust using the HOUR and MINUTE buttons. Press CLOCK SET again to confirm.
How do I change the alarm from buzzer to radio?
Set the ALARM MODE switch to RADIO. Ensure the radio is tuned to your desired station and volume is set appropriately.
How do I use the snooze function?
When the alarm sounds, press the SNOOZE/DIMMER button. The alarm will stop and sound again after approximately 9 minutes.
How do I replace the backup battery?
Locate the battery compartment on the bottom of the unit. Open the cover and replace the old 9V battery with a new one, observing correct polarity.
How do I adjust the display brightness?
Press the DIMMER button repeatedly to cycle through brightness levels (high, low, off).
My radio is not working. What can I do?
Check that the volume is turned up. Extend the FM antenna fully or adjust the AM antenna. Tune to a known strong station. If using battery, ensure it is fresh.
How do I set the sleep timer?
Press the SLEEP button to turn on the radio. Repeated presses cycle through sleep times (15, 30, 45, 60 minutes). The radio will turn off automatically.
Why is the display flashing?
A flashing display indicates a power interruption (e.g., AC power loss). Set the time and alarms again. If backup battery is dead, replace it.
How should I clean the alarm clock?
Use a soft, dry cloth to gently wipe the surface. Do not use water, cleaning solvents, or abrasive materials. Avoid getting moisture into any openings.
User questions about ICF-C120 SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm Clock in PDF format for free! Find your manual ICF-C120 - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ICF-C120 by SONY.