SONY

ICF-36 - Alarm Clock SONY - Free user manual and instructions

Find the device manual for free ICF-36 SONY in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SONY ICF-36 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Type de produitAlarm Clock Radio
MarqueSony
ModèleICF-36
Dimensions (approx)120 x 60 x 120 mm
Poids (approx)300 g
AlimentationAC 120V 60Hz or DC 9V (2x AA batteries for backup)
AffichageLED display with brightness dimmer
Fonctions principalesAM/FM radio, dual alarm, snooze, sleep timer, battery backup
Entretien et nettoyageClean with a soft dry cloth; do not use liquids
SécuritéDo not expose to moisture; unplug during lightning storms
Pièces détachéesUse only Sony authorized replacement parts
RéparabilitéNot user-serviceable; contact Sony support for repairs
Fréquences radioFM 87.5–108 MHz, AM 530–1710 kHz
AlarmeDual alarm with choice of radio or buzzer
Snooze9 minutes duration
Affichage couleurBlue or white LED (model dependent)
Contrôle du volumeRotary knob on the side
Batterie de secoursCR2032 or 2x AA (keeps time and alarm settings)
Garantie1 year limited warranty
Informations généralesDesigned for bedside use; compact and portable

Frequently Asked Questions - ICF-36 SONY

How do I set the alarm on my Sony ICF-36?
Press and hold the ALARM SET button until the hour flashes. Use the TUNE knob to set the hour, then press ALARM SET again to set minutes. Choose alarm mode (radio or buzzer) by pressing ALARM MODE.
How do I change the current time?
Press and hold the TIME SET button until the hour flashes. Rotate the TUNE knob to adjust the hour, press TIME SET again to adjust minutes, then press once more to confirm.
How do I use the sleep timer?
Press the SLEEP button repeatedly to select a sleep duration (15, 30, 60, or 90 minutes). The radio will turn off automatically after the set time.
How do I set radio presets?
Tune to the desired station using the TUNE knob, then press and hold one of the PRESET buttons (1-5) until the display confirms the station is saved.
How should I clean my alarm clock?
Unplug the unit. Use a soft, dry cloth to wipe the exterior. Do not use any liquids or abrasive cleaners as they may damage the electronics.
Why is the display dim?
The display brightness can be adjusted using the DIMMER switch located on the back of the unit. Slide it to the desired level: high, medium, or low.
How do I reset the alarm clock to factory settings?
Insert a paper clip into the small RESET hole on the bottom of the unit and press gently. All settings will return to factory defaults, including time and alarms.
How does the battery backup work?
Install 2 AA batteries (not included) in the compartment on the bottom. These batteries maintain the time and alarm settings during a power outage. The clock will continue to operate using batteries only for timekeeping; radio and alarm buzzer require AC power.
What is the snooze duration and how do I use it?
When the alarm sounds, press the large SNOOZE button on top. The alarm will stop and ring again after 9 minutes. You can snooze multiple times.
How do I improve FM radio reception?
Fully extend the FM antenna wire located on the back of the unit. For better reception, reposition the antenna or the clock itself. Avoid placing it near metal objects or large appliances.

User questions about ICF-36 SONY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Alarm Clock in PDF format for free! Find your manual ICF-36 - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ICF-36 by SONY.

USER MANUAL ICF-36 SONY

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SONY

Model : ICF-36

Category : Alarm Clock