COINTRA

TDG Plus 50 S - Water heater COINTRA - Free user manual and instructions

Find the device manual for free TDG Plus 50 S COINTRA in PDF.

📄 36 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice COINTRA TDG Plus 50 S - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Gas Tank Water Heater
Brand Cointra
Model TDG Plus 50 S
Capacity 50 liters
Energy Source Natural Gas or Propane
Dimensions (H x W x D) 850 x 450 x 450 mm
Net Weight 25 kg
Maximum Power Input 24 kW
Temperature Range 35°C - 70°C
Maximum Working Pressure 8 bar
Safety Valve Setting 8 bar
Tank Material Enameled Steel
Flue Type Room-sealed (Turbofan)
Ignition Electronic
Control Thermostatic
Installation Type Wall-mounted
Warranty 2 years
Energy Efficiency Class C
Noise Level ≤ 50 dB(A)
Standby Heat Loss 45 W
Maintenance Annual drain and anode inspection
Safety Features Overheat protection, flame failure device, anti-freeze function
Spare Parts Availability Yes, through authorized service centers

Frequently Asked Questions - TDG Plus 50 S COINTRA

How do I install the Cointra TDG Plus 50 S water heater?
Installation must be carried out by a qualified professional. Ensure proper gas and water connections, and the flue is correctly vented to the outside. Refer to the installation manual for detailed steps.
What maintenance does the water heater require?
Annual maintenance is recommended, including draining the tank to remove sediment, checking the anode rod, and inspecting the burner and flue for blockages.
Why is my water heater not producing hot water?
Check if the gas supply is on, the pilot light is lit, and the thermostat is set correctly. If the problem persists, the thermocouple or gas valve may be faulty.
How can I improve the energy efficiency of my water heater?
Set the thermostat to 60°C (140°F), insulate hot water pipes, and drain the tank annually to remove sediment buildup which reduces efficiency.
What safety devices are included?
The water heater includes overheat protection, a flame failure device that shuts off gas if the flame goes out, and an anti-freeze function to prevent freezing in cold climates.
How long does the water heater typically last?
With proper maintenance, the expected lifespan is 8-12 years. The anode rod should be checked every 2-3 years and replaced if significantly corroded.
Can I use the water heater with propane instead of natural gas?
Yes, the model can be converted for propane use. A conversion kit is required and should be installed by a qualified technician. Do not attempt to convert without proper parts.
What should I do if the water heater leaks?
Turn off the gas and water supply immediately. Leaks may originate from the tank (replace unit) or from connections (tighten or replace fittings). Contact a professional for diagnosis.
How do I adjust the water temperature?
The thermostat is located on the front panel. Turn the dial to your desired temperature (range 35°C to 70°C). Wait a few hours for the water to heat up to the new setting.
Where can I find spare parts or service?
Contact Cointra's authorized service centers. Use the model number (TDG Plus 50 S) when ordering parts. A list of service centers is available on the Cointra website.

User questions about TDG Plus 50 S COINTRA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Water heater in PDF format for free! Find your manual TDG Plus 50 S - COINTRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TDG Plus 50 S by COINTRA.

USER MANUAL TDG Plus 50 S COINTRA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : COINTRA

Model : TDG Plus 50 S

Category : Water heater