VE814AT - AV Extender ATEN - Free user manual and instructions
Find the device manual for free VE814AT ATEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Extender (HDMI) |
| Model | VE814AT |
| Brand | ATEN |
| Dimensions (W x D x H) | 120 mm x 80 mm x 25 mm |
| Weight | 200 g |
| Power Supply | 5V DC 1A |
| Max Transmission Distance | 60 m (over CAT5e/6) |
| Supported Resolution | 1080p Full HD |
| Video Bandwidth | 225 MHz |
| Connector Type (Input) | 1 x HDMI Type A (female) |
| Connector Type (Output) | 1 x RJ-45 (female) |
| IR Extension | Yes, via IR blaster cable |
| ESD Protection | 8 kV (air), 4 kV (contact) |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 0% to 80% RH, non-condensing |
| Maintenance | Clean with a soft, dry cloth; do not use liquids |
| Safety Precautions | Keep away from water and heat sources; use only supplied power adapter |
| Spare Parts & Repairability | No user-serviceable parts inside; contact ATEN support for repairs |
| General Information | HDMI extender with IR pass-through; plug-and-play installation |
Frequently Asked Questions - VE814AT ATEN
What is the maximum distance this extender can transmit HDMI signal?
The ATEN VE814AT can transmit HDMI signals up to 60 meters over a single CAT5e/6 cable.
Does the VE814AT support 4K resolution?
No, this model supports up to 1080p Full HD resolution. For 4K, please consider ATEN's 4K extenders.
What type of cable is required for connection?
You need a CAT5e or CAT6 Ethernet cable with RJ45 connectors. Shielded cable is recommended for longer runs.
Can I use the extender with a wall plate?
Yes, the VE814AT can be integrated with standard wall plates using its compact size and mounting holes.
How do I set up the IR extension?
Connect the supplied IR blaster to the transmitter unit and place it in front of the source device. The receiver will transmit IR signals from the remote.
Is the VE814AT plug-and-play?
Yes, it requires no software installation. Just connect the HDMI source to the transmitter, run CAT5e/6 cable to the receiver, and power both units.
What is the power consumption of this extender?
Each unit consumes less than 5W (5V DC, 1A). Use only the included power adapters.
Can I daisy-chain multiple extenders?
No, the VE814AT is a point-to-point extender and does not support daisy-chaining. Use a switch or matrix for multiple outputs.
Does it support audio return?
No, this extender transmits video and audio one-way from source to display. It does not support ARC or return channels.
What should I do if there is no signal on the display?
Check that both units are powered, HDMI cable is secure, and CAT5e/6 cable is properly terminated. Try a shorter cable to rule out distance issues.
User questions about VE814AT ATEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your AV Extender in PDF format for free! Find your manual VE814AT - ATEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VE814AT by ATEN.
USER MANUAL VE814AT ATEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ATEN
Model : VE814AT
Category : AV Extender