IAN 97799 - Bike computer CRIVIT - Free user manual and instructions
Find the device manual for free IAN 97799 CRIVIT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wired Bike Computer |
| Brand | Crivit |
| Model | IAN 97799 |
| Dimensions (approx.) | 50 x 40 x 15 mm |
| Weight (approx.) | 30 g (including battery) |
| Power Supply | 1 x CR2032 battery (included) |
| Display Type | LCD, single-line |
| Speed Functions | Current, Average, Maximum speed |
| Distance Functions | Trip distance, Odometer |
| Time Functions | Clock, Stopwatch, Ride time |
| Measurement Units | km/h or mph (selectable) |
| Water Resistance | IPX4 (splash proof) |
| Mounting | Handlebar bracket (included) |
| Material | Plastic casing, silicone button |
| Sensor Type | Wired, wheel magnet |
| Wheel Size Calibration | Manual input (wheel circumference) |
| Auto Start/Stop | Yes (when motion detected) |
| Backlight | No |
| Battery Life (approx.) | 12-18 months under normal use |
| Operating Temperature | -10°C to 50°C |
| Cleaning | Wipe with damp cloth; avoid solvents |
| Spare Parts | CR2032 battery, mounting bracket (standard) |
| Repairability | Not user-serviceable; contact manufacturer |
| Warranty | 3 years from date of purchase |
Frequently Asked Questions - IAN 97799 CRIVIT
How do I install the bike computer on my handlebar?
Use the included bracket and zip ties. Wrap the bracket around the handlebar, tighten the ties, then slide the computer onto the bracket until it clicks.
How do I replace the battery?
Remove the computer from the bracket, open the battery compartment (usually at the back) with a small screwdriver, replace the CR2032 battery with the positive side up, and close the compartment.
How do I reset the odometer?
Press and hold the buttons 'MODE' and 'SET' simultaneously for about 3 seconds until the display shows '000' to reset the trip distance. The total odometer cannot be reset.
Is the bike computer waterproof?
It is splash-proof (IPX4), so it can withstand rain, but do not submerge it in water.
How do I set the wheel size?
Measure your wheel circumference in mm (e.g., roll the wheel one full turn and mark the ground). Press the 'SET' button, then use the dial or buttons to input the value. Common sizes: 700C wheel ~2100-2200 mm.
Why does the screen show '0.0'?
The computer may not be detecting the wheel magnet. Ensure the magnet is correctly attached to a spoke and passes close to the sensor (within 5 mm). Check the sensor cable connection.
Can I switch between km/h and mph?
Yes. While in speed mode, press and hold the 'SET' button for 2 seconds. The unit will toggle. Confirm the change by pressing 'MODE'.
Does it have a backlight?
No, this model does not have a backlight. It is best used in daylight.
How long does the battery last?
Under normal use, the CR2032 battery lasts approximately 12-18 months. A low battery indicator will appear when replacement is needed.
What is included in the box?
The package contains: bike computer unit, handlebar bracket, wheel magnet, sensor with cable, zip ties, and user manual.
User questions about IAN 97799 CRIVIT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bike computer in PDF format for free! Find your manual IAN 97799 - CRIVIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IAN 97799 by CRIVIT.
USER MANUAL IAN 97799 CRIVIT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CRIVIT
Model : IAN 97799
Category : Bike computer