PANASONIC

SA-313 - Receiver PANASONIC - Free user manual and instructions

Find the device manual for free SA-313 PANASONIC in PDF.

📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice PANASONIC SA-313 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Type Stereo Receiver
Brand Panasonic
Model SA-313
Dimensions (approx) 430 x 140 x 320 mm
Weight (approx) 8.5 kg
Power Output 40W per channel into 8 ohms (RMS)
Frequency Response 20Hz - 20kHz
Total Harmonic Distortion < 0.5%
Signal-to-Noise Ratio 70 dB
Inputs Phono, Aux, Tape, Tuner
Outputs Speaker A/B, Headphone, Tape Rec
Tuner AM/FM, FM Stereo
Power Supply AC 120V/240V, 50/60Hz
Power Consumption 150W
Cleaning Use a dry, soft cloth. Avoid solvents.
Safety Instructions Do not expose to moisture. Ensure ventilation.

Frequently Asked Questions - SA-313 PANASONIC

How do I connect speakers to the Panasonic SA-313?
Connect speaker wires to the Speaker A/B terminals on the back. Ensure correct polarity (red to +, black to -). Use at least 16-gauge wire for optimal performance.
How do I set up the FM antenna?
Connect the included FM dipole antenna to the FM antenna terminals. Extend the arms fully and position for best reception. For AM, use the loop antenna provided.
What is the power output of the SA-313?
The SA-313 delivers 40W per channel (RMS) into 8 ohms, suitable for most bookshelf speakers.
How do I clean the receiver?
Use a dry, soft cloth to wipe the exterior. Do not use chemical cleaners or water. Ensure the unit is unplugged before cleaning.
Why is there no sound from the speakers?
Check that speaker wires are securely connected and the Speaker selector is set to A or B. Ensure the source is selected and volume is turned up. Also check if the mute button is active.
How do I select the input source?
Rotate the input selector knob on the front panel to choose between Phono, Aux, Tape, or Tuner. The selected source will be indicated on the display.
Can I use headphones with the SA-313?
Yes, plug your headphones into the Headphone jack on the front panel. Speakers will be automatically muted when headphones are connected.
How do I connect a turntable?
Connect the turntable to the Phono input using RCA cables. Ensure your turntable has a ground wire and connect it to the ground terminal to reduce hum.
What is the warranty period for the SA-313?
Warranty details vary by region and purchase date. Typically, Panasonic offers 1 to 2 years limited warranty. Check your specific documentation.
Where can I find the user manual for download?
Visit notice-facile.com and search for 'Panasonic SA-313' to download the manual in PDF format for free.

User questions about SA-313 PANASONIC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Receiver in PDF format for free! Find your manual SA-313 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SA-313 by PANASONIC.

USER MANUAL SA-313 PANASONIC

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : PANASONIC

Model : SA-313

Category : Receiver