6000004341 - Inverter AEG - Free user manual and instructions
Find the device manual for free 6000004341 AEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Inverter / UPS |
| Input Voltage | 220-240 V AC |
| Output Voltage | 220-240 V AC (pure sine wave) |
| Frequency | 50/60 Hz (auto sensing) |
| Power Rating | 600 VA / 360 W |
| Battery Type | Sealed lead-acid (maintenance-free) |
| Battery Voltage | 12 V |
| Dimensions (W x H x D) | 280 x 85 x 380 mm |
| Weight | 8.5 kg |
| Protection | Overload, short circuit, overheat, battery deep discharge |
| Display | LED indicators for power, battery, fault |
| Cooling | Intelligent fan (variable speed) |
| Noise Level | < 40 dB (typical) |
| Communication Port | USB (HID) for monitoring |
| Transfer Time | < 10 ms (typical) |
| Operating Temperature | 0°C to 40°C |
| Certifications | CE, RoHS |
Frequently Asked Questions - 6000004341 AEG
What is the runtime of the AEG 6000004341 inverter?
The runtime depends on the load. At half load (180W), it can last approximately 10-15 minutes with a standard 7Ah battery. For longer runtime, consider a higher capacity external battery.
Can I connect the inverter directly to my solar panels?
No, this model is designed for AC input (grid). It charges the internal battery from the mains and provides backup. For solar integration, you would need a separate solar charge controller and a compatible inverter.
How do I replace the battery?
Disconnect the inverter from mains and remove the front panel. The battery is accessible and can be replaced with a similar 12V lead-acid battery. Ensure correct polarity and reconnect. Refer to the manual for safety.
What does the 'fault' LED indicate?
The fault LED lights up when there is an overload, short circuit, or battery issue. Check the connected load and reduce if necessary. If persistent, contact support.
Is the output pure sine wave?
Yes, the AEG 6000004341 provides a pure sine wave output, suitable for sensitive electronics like computers and medical equipment.
Can I use this inverter in a car?
It is designed for indoor use with a mains power supply. For car use, a dedicated DC-AC inverter is recommended. This unit is meant for home/office backup.
How do I clean the inverter?
Disconnect from power and use a dry, soft cloth to wipe the exterior. Do not use water or chemicals. Ensure ventilation grilles are free from dust.
What is the warranty period?
AEG typically offers a 2-year warranty for this product. Register on the AEG website to activate extended warranty if available.
Does the inverter have a USB charging port?
No, this model does not include a USB port. It provides standard AC outlets. For USB charging, use a separate adapter.
Why does the fan run constantly?
The fan runs to cool the internal components. Under low load, it may run intermittently. If it runs loudly or constantly at idle, check for dust or a faulty fan.
User questions about 6000004341 AEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual 6000004341 - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 6000004341 by AEG.
USER MANUAL 6000004341 AEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AEG
Model : 6000004341
Category : Inverter