Mimoka 600 Shiny M - Coffee maker CECOTEC - Free user manual and instructions
Find the device manual for free Mimoka 600 Shiny M CECOTEC in PDF.
| Brand | Cecotec |
| Model | Mimoka 600 Shiny M |
| Product type | Italian espresso maker (Moka) |
| Capacity | 6 cups (approx. 300 ml) |
| Material | Aluminum |
| Finish | Shiny |
| Heat source | All types of stoves (gas, electric, ceramic glass, induction) |
| Preparation system | Steam percolation |
| Approximate weight | 0.5 kg |
| Safety valve | Yes |
| Handle | Yes, insulated material |
| Suitable for induction | Yes (except 300 models) |
| Care and cleaning | Hand wash with water and soap; do not put in dishwasher; do not use chemicals |
| Safety | Do not touch hot surfaces; use handle; do not open under pressure; direct steam jet away from user |
| Spare parts | Gasket, filter (available from manufacturer) |
| Warranty | In accordance with applicable regulations; contact After-Sales Service |
| After-sales service | +34 963 21 07 28 |
| Country of manufacture | China |
| Design | Spain |
Frequently Asked Questions - Mimoka 600 Shiny M CECOTEC
User questions about Mimoka 600 Shiny M CECOTEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Coffee maker in PDF format for free! Find your manual Mimoka 600 Shiny M - CECOTEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mimoka 600 Shiny M by CECOTEC.
USER MANUAL Mimoka 600 Shiny M CECOTEC
Safety instructions 5
-
Before use 20
-
Operation 20
-
Cleaning and maintenance 21
-
Technical specifications 21
-
Technical support and warranty 21
SOMMAIRE
Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.
- Keep the moka pot out of the reach of children during use.
- Make sure to stay far enough away from the steam emitted.
- Use the moka pot only for its intended purpose.
- Remove the moka pot from the heat source and let it cool down before opening it.
- Do not touch the hot surfaces of the moka pot. Use the handle and lid knob.
- Do not use the moka pot with the bottom chamber empty.
-
Follow the instructions for use to choose the appropriate heat source(s).
-
Use only spare parts from the manufacturer according to the model.
- Do not overheat the moka pot or allow the flame to rise up its sides. This could damage the product's handle.
- Do not use the moka pot to store espresso coffee.
- Do not use the appliance if all parts and components are not included and assembled.
- The temperature of accessible surfaces may be high while the appliance is in use and could cause burns. Do not touch hot surfaces during operation or immediately after. Use protection to avoid burns.
- Keep the moka pot away from children when in use and if it contains hot substances.
- Do not use extracts or substances other than coffee.
- Do not press coffee down.
- This appliance is designed to be used with water only.
- Allow the appliance to cool down before opening it.
- Hold the appliance by the handle during use to avoid burns.
Note: the moka pot will stain on the inside due to coffee and water minerals, and on the outside due to direct exposure to heat. This is a normal process that will take place over time.
INSTRUCTIONS DE SÉCURITÉ
- This appliance is packaged in a way as to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the appliance when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.
- Wash the appliance with warm, soapy water to remove any dirt or oil.
- Dry the appliance thoroughly before using it again.
2. OPERATION
Fig. 1
Please note
The moka pot is compatible with induction hobs (except for models 300).
- After cleaning the moka pot, fill the bottom chamber with water up to the safety valve.
- Place the funnel basket in the bottom chamber of the moka pot. Fill the funnel basket with finely-ground espresso coffee.
- Place the top chamber of the moka pot on the base and close it tightly.
- Set the stove to low or medium-low heat. When using a gas-flame stove, make sure the moka pot's handle is not exposed directly to the flame.
- After a few minutes, the water will start to boil, and the coffee will filter to the top chamber of the moka pot.
- Pour the coffee carefully.
- Once the moka pot has cooled down, unscrew the top chamber, and clean it thoroughly.
Note
Do not allow the moka pot to come into contact with salty or acidic substances.
Appropriate heat sources:
- Cumbia Mokclassic 300 models: gas, electric, and vitroceramic hobs.
- Cumbia Mokclassic 600 models: all types of cookers.
- Cumbia Mokclassic 900 models: all types of cookers.
- Cumbia Mokclassic 1200 models: all types of cookers.
3. CLEANING AND MAINTENANCE
- Do not pour cold water into the moka pot when hot.
- Wash it with water and soap after each use.
- Dry it thoroughly before storing it to avoid stains.
- Do not use abrasive or chemical products to clean the appliance.
- The moka pot is not dishwasher safe.
- Use specific cleaning agents for metallic surfaces to clean the surface of the moka pot.
4. TECHNICAL SPECIFICATIONS
Models:
Cumbia Mokclassic 300 Beige / Black/ Blue / Garnet / Shiny / Red Cumbia Mokclassic 600 Beige / Black/ Blue / Garnet / Shiny / Red Cumbia Mokclassic 900 Beige / Black/ Blue / Garnet / Shiny/ Red Cumbia Mokclassic 1200 Beige / Black/ Blue / Garnet / Shiny / Red
Product reference:
01654 / 01666 / 01658 / 01662 / 01670 / 00172 01655 / 01667 / 01659 / 01663 / 01671 / 00173 01656 / 01668 / 01660 / 01664 / 01672 / 00174 01657 / 01669 / 01661 / 01665 / 01673 / 00175 Made in China | Designed in Spain
5. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 96 321 07 28.