SuperWorkstation 7049A-T - Workstation Supermicro - Free user manual and instructions
Find the device manual for free SuperWorkstation 7049A-T Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Workstation |
| Model | SuperWorkstation 7049A-T |
| Form Factor | Tower (4U) |
| Dimensions (H x W x D) | 17.2 x 6.9 x 25.5 inches (437 x 175 x 648 mm) |
| Weight | Approximately 45 lbs (20.4 kg) |
| Power Supply | 920W redundant (Titanium Level) |
| Processor Support | Dual Intel Xeon Scalable (2nd Gen) processors |
| Memory | Up to 3TB ECC DDR4, 24 DIMM slots |
| Storage | Up to 8x 3.5" SAS3/SATA3 or 10x 2.5" with optional cage |
| Expansion Slots | 7 PCIe 3.0 x16 slots |
| Graphics | Supports up to 2 double-wide GPUs |
| Networking | Dual 10GbE (Intel X540) + dedicated IPMI |
| Cooling | 3x hot-swap 92mm fans + 1x rear exhaust |
| Security | TPM 2.0, chassis intrusion detection, secure boot |
| Management | IPMI 2.0 with Virtual Media over LAN |
| Front I/O | 2x USB 3.0, audio, power button, status LEDs |
| Rear I/O | 2x USB 3.0, 2x USB 2.0, VGA, serial, dual GbE, IPMI LAN |
| Operating System | Windows 10/11 Pro, Linux (certified) |
| Cleaning | Use compressed air for dust removal; avoid liquids |
| Maintenance | Replace fans and PSU modules without tools |
| Spare Parts | Available via Supermicro authorized distributors |
| Repairability | Modular design with easy access to components |
Frequently Asked Questions - SuperWorkstation 7049A-T Supermicro
How do I enter the BIOS on the Supermicro 7049A-T?
Press the Delete key during POST to enter BIOS setup. Alternatively, use IPMI remote console to access.
What processors are supported?
Dual Intel Xeon Scalable (Cascade Lake-SP or Skylake-SP) with LGA 3647 socket. Supports up to 28 cores per CPU.
How can I install additional memory?
The motherboard has 24 DIMM slots supporting DDR4 ECC registered memory. Install in sets for optimal dual-channel performance.
Can I use M.2 NVMe drives?
Yes, via optional M.2 PCIe adapter cards. The motherboard has no native M.2 slot; use a PCIe x4 adapter.
How do I update the firmware?
Download the latest BIOS/IPMI firmware from Supermicro's website. Use the SUPERO FLASH utility or IPMI web interface.
What is the maximum GPU support?
Up to two double-width GPUs (e.g., NVIDIA RTX A6000) with a 900W power budget. Ensure adequate PCIe power cables.
How do I reset the IPMI password?
Power off the system, set the IPMI reset jumper (JBR1) to pins 2-3, power on, then normal operation. Default credentials: ADMIN/ADMIN.
Why are the fans running at high speed?
Check BIOS thermal profile or IPMI sensor readings. Ensure all fans are properly connected and no overheat conditions exist. Adjust fan speed via IPMI or BIOS.
Can I replace the power supply myself?
Yes, the power supply is hot-swappable (redundant) and can be replaced without tools. Ensure the replacement is a Supermicro-approved 920W module.
Where can I find the product manual?
The manual is available for download on Supermicro's official website or via the notice-facile.com page for this model.
User questions about SuperWorkstation 7049A-T Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Workstation in PDF format for free! Find your manual SuperWorkstation 7049A-T - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperWorkstation 7049A-T by Supermicro.
USER MANUAL SuperWorkstation 7049A-T Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperWorkstation 7049A-T
Category : Workstation