ERVH100S - Air Conditioning BROAN - Free user manual and instructions
Find the device manual for free ERVH100S BROAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Energy Recovery Ventilator (ERV) |
| Model | ERVH100S |
| Brand | Broan |
| Dimensions (H x W x D) | 24 x 24 x 12 inches |
| Weight | Approximately 40 lbs |
| Power Supply | 120 V, 60 Hz, 3 A |
| Airflow Capacity | Up to 100 CFM |
| Core Type | Enthalpy heat exchanger |
| Efficiency | Up to 70% energy recovery |
| Filtration | Washable pre-filter and optional MERV 13 |
| Installation | Wall or ceiling mount with duct connections |
| Controls | Manual on/off switch or remote compatible |
| Duct Size | 6-inch round ducts |
| Operating Temperature | -20°C to 50°C |
| Noise Level | Less than 50 dB(A) |
| Maintenance | Clean filters every 3 months; annual core inspection |
| Safety | Disconnect power before servicing; UL listed |
| Warranty | 5-year limited |
| Included Accessories | Mounting brackets, duct collars, filter |
| Compliance | ASHRAE 62.2, ENERGY STAR certified |
Frequently Asked Questions - ERVH100S BROAN
What is the purpose of the Broan ERVH100S?
The Broan ERVH100S is an energy recovery ventilator that provides continuous fresh air while recovering heat and humidity from exhaust air to improve indoor air quality and energy efficiency.
How do I install the ERVH100S?
Installation requires mounting the unit on a wall or ceiling, connecting 6-inch round ductwork to the fresh air and exhaust ports, and wiring to a 120V power source. Detailed instructions are in the manual.
How often should I clean the filters?
Clean the washable pre-filter every 3 months. If an optional MERV 13 filter is used, replace it every 6-12 months depending on air quality.
Can the ERVH100S be used in cold climates?
Yes, it operates down to -20°C. The enthalpy core helps prevent freezing by recovering moisture, but a frost control may be needed in extreme cold.
What size room is the ERVH100S suitable for?
It is designed for homes up to 2,000 sq ft. It provides up to 100 CFM of continuous ventilation, meeting ASHRAE 62.2 standards for a typical residence.
Does the ERVH100S require professional installation?
While a skilled DIYer can install it, professional installation is recommended to ensure proper duct sealing, electrical connections, and compliance with local codes.
What maintenance does the core require?
The enthalpy core should be inspected annually. If dirty, vacuum gently or rinse with water and let dry completely before reinstalling.
Can I control the ERVH100S with a thermostat?
Yes, it can be wired to a standard thermostat or a dedicated controller for automatic operation based on humidity or CO2 levels.
What does the ENERGY STAR certification mean?
It means the unit meets strict efficiency guidelines set by the EPA, ensuring lower energy consumption and operational cost compared to non-certified models.
How do I troubleshoot if the unit is not running?
Check the power connection, ensure the switch is on, inspect the filter for blockage, and verify that the ductwork is not obstructed. Refer to the manual for error codes.
User questions about ERVH100S BROAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual ERVH100S - BROAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ERVH100S by BROAN.
USER MANUAL ERVH100S BROAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BROAN
Model : ERVH100S
Category : Air Conditioning