P350 - Receiver Phase Technology - Free user manual and instructions
Find the device manual for free P350 Phase Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver |
| Brand | Phase Technology |
| Model | P350 |
| Dimensions (Approx.) | 17.3 x 11.8 x 3.9 inches (440 x 300 x 100 mm) |
| Weight (Approx.) | 22 lbs (10 kg) |
| Power Supply | AC 120V, 60Hz |
| Power Consumption | 350W max |
| Inputs | AM/FM antenna, AUX, CD, Tape, Phono |
| Outputs | Speaker terminals (A/B), Headphone jack |
| Tuner Bands | AM, FM |
| Amplifier Power | 100W per channel (stereo) |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | 80 dB |
| Remote Control | Included |
| Cleaning | Wipe with dry, soft cloth. Do not use liquids. |
| Safety | Unplug before cleaning. Do not expose to moisture. |
| Spare Parts / Repairability | Contact Phase Technology support for parts and service. |
| Manual | Available in PDF format online. |
Frequently Asked Questions - P350 Phase Technology
How do I connect speakers to the P350?
Use the speaker terminals on the back. Connect positive to red (+) and negative to black (-). Ensure impedance is 8 ohms per channel.
Can I use the P350 with a turntable?
Yes, if your turntable has a built-in preamp. Otherwise, connect to the Phono input for moving magnet cartridges.
How do I set the clock on the P350?
Press and hold the Clock button, then use the Volume knob to adjust hours and minutes. Press Clock again to set.
Why is there no sound from the speakers?
Check that speakers are connected securely, the receiver is not muted, and the correct input is selected. Also verify speaker impedance.
How do I clean the P350?
Unplug the unit. Wipe the exterior with a dry, soft cloth. Do not use any chemical cleaners or liquids.
Can I use headphones with the P350?
Yes, plug headphones into the Headphone jack on the front panel. Speakers will be automatically muted.
How do I store AM/FM presets?
Tune to the desired station, then press and hold a Preset button (1-10) until the display flashes. Repeat for other stations.
What should I do if the remote control does not work?
Replace the batteries with fresh ones. Ensure there is a clear line of sight to the receiver. Check if the remote sensor is blocked.
Is the P350 compatible with 4-ohm speakers?
The P350 is designed for 8-ohm speakers. Using 4-ohm speakers may cause overheating or damage. Stick to 8-ohm for best performance.
What is the power consumption in standby?
Standby power consumption is typically less than 5W. For energy savings, unplug the unit when not in use for extended periods.
User questions about P350 Phase Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual P350 - Phase Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P350 by Phase Technology.
USER MANUAL P350 Phase Technology
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Phase Technology
Model : P350
Category : Receiver