SMWB-E06-B1 - Uncategorized Lectrosonics - Free user manual and instructions
Find the device manual for free SMWB-E06-B1 Lectrosonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Bodypack Transmitter |
| Brand | Lectrosonics |
| Model | SMWB-E06-B1 |
| Frequency Block | Block 06 (470–494 MHz) |
| RF Output Power | 25 mW / 50 mW (selectable) |
| Modulation | FM |
| Frequency Stability | ±0.005% |
| Audio Input | TA5M (XLR) locking connector |
| Power Source | 2 x AA alkaline or rechargeable NiMH |
| Battery Life | Up to 14 hours with alkaline |
| Dimensions (H x W x D) | 3.6 x 2.5 x 1.1 in (91 x 64 x 28 mm) |
| Weight | 5.6 oz (159 g) with batteries |
| Operating Temperature | 20°F to 140°F (-6°C to 60°C) |
| Included Accessories | Belt clip, removable 1/2 wave antenna |
| Compatible Receivers | Lectrosonics UCR, SR, and DSR series |
| Safety Warnings | Avoid moisture; use only specified batteries |
| Cleaning | Wipe with dry, soft cloth; no solvents |
| Spare Parts Available | Batteries, antennas, belt clips, power cables |
| Warranty | 2 years (check with dealer) |
Frequently Asked Questions - SMWB-E06-B1 Lectrosonics
How do I turn on the SMWB-E06-B1 transmitter?
Press and hold the power button located on the side until the display lights up. To turn off, press and hold again.
What type of batteries does it use?
It uses two AA batteries. Alkaline or rechargeable NiMH are recommended. Do not mix old and new batteries.
How do I change the operating frequency?
Navigate the menu using the up/down buttons. Select 'Freq' and choose from available channels. The transmitter will automatically sync with a compatible receiver if IR sync is used.
Can I pair this transmitter with any Lectrosonics receiver?
It is compatible with most Lectrosonics UHF receivers, especially SR, UCR, and DSR series. Ensure the receiver is set to the same frequency block.
What is the maximum operating range?
Under typical conditions, range can reach up to 300 feet (90 meters) line-of-sight. Obstacles and interference may reduce range.
How should I clean the transmitter?
Use a soft, dry cloth to wipe the exterior. Do not use liquids, solvents, or abrasive cleaners. Keep the audio input and battery contacts dry.
Can I use rechargeable batteries?
Yes, rechargeable NiMH AA batteries are supported. Battery life may be shorter than alkaline. The transmitter does not have internal charging, so use an external charger.
How do I attach the belt clip?
Slide the belt clip onto the back of the transmitter until it clicks. To remove, press the release tab and slide it off.
What type of microphone connector does it have?
It uses a TA5M (also known as mini XLR) locking connector. Compatible with Lectrosonics lavalier microphones and others using the same pinout.
The transmitter is on but no audio is being received. What should I do?
Check if the receiver is on the same frequency. Ensure the microphone is securely connected and the audio gain is set properly. Verify batteries are fresh. Try a different channel to avoid interference.
User questions about SMWB-E06-B1 Lectrosonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SMWB-E06-B1 - Lectrosonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SMWB-E06-B1 by Lectrosonics.
USER MANUAL SMWB-E06-B1 Lectrosonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lectrosonics
Model : SMWB-E06-B1
Category : Uncategorized