WM/X - Uncategorized Lectrosonics - Free user manual and instructions
Find the device manual for free WM/X Lectrosonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Microphone System |
| Model | WM/X |
| Brand | Lectrosonics |
| Frequency Range | 470-614 MHz (UHF) |
| RF Power Output | 50-100 mW (selectable) |
| Audio Frequency Response | 50 Hz - 20 kHz |
| Dynamic Range | > 120 dB (A-weighted) |
| Battery Type | 2 AA alkaline or rechargeable NiMH |
| Battery Life | Up to 8 hours (alkaline) |
| Dimensions (Transmitter) | 3.9 x 2.6 x 0.8 inches (99 x 66 x 20 mm) |
| Weight (Transmitter) | 4.2 oz (120 g) with batteries |
| Dimensions (Receiver) | 6.3 x 4.0 x 1.0 inches (160 x 102 x 25 mm) |
| Weight (Receiver) | 10.6 oz (300 g) |
| Power Supply (Receiver) | 12-18 VDC external supply |
| Antenna Type | Detachable BNC (supplied) |
| Audio Output Level | +8 dBu max, XLR and 1/4" jack |
| Encryption | AES-256 (optional) |
| Operating Temperature | -20°C to 50°C |
| Included Accessories | Receiver, transmitter, antennas, power supply, manual |
| Cleaning Instructions | Wipe with dry cloth; avoid solvents |
| Safety Certifications | FCC, CE, RoHS |
Frequently Asked Questions - WM/X Lectrosonics
How do I pair the transmitter and receiver?
Press the SYNC button on the receiver, then press the SET button on the transmitter within 30 seconds. The devices will automatically scan and lock onto a clear frequency.
What batteries does the transmitter use?
The transmitter requires 2 AA batteries. Alkaline or rechargeable NiMH are supported. For best performance, use high-quality alkaline batteries.
How do I adjust the audio level on the transmitter?
Use the GAIN control knob on the side of the transmitter. Rotate clockwise to increase gain or counterclockwise to decrease. The display shows the audio level meter.
What is the operating range of the WM/X?
The typical operating range is up to 300 feet (91 meters) line-of-sight. Range may vary due to obstacles and interference.
How do I clean and maintain the system?
Wipe the exterior with a soft dry cloth. Do not use any solvents or abrasive cleaners. Keep the antenna connectors dry and free from debris.
Can I use multiple WM/X systems together?
Yes, you can use up to 8 systems simultaneously within the same frequency block without interference, provided they are tuned to different frequencies.
The receiver shows no signal. What should I check?
First, ensure both units are powered on and the transmitter battery is not dead. Check that both antennas are attached and the transmitter is within range. Also verify that the frequency is matched.
Is there a mute function?
Yes, press the MUTE button on the transmitter to mute the audio. The display will show a mute icon. Press again to unmute.
How do I update the firmware?
Firmware updates are performed via the Lectrosonics Device Manager software. Connect the receiver via USB to a computer and follow the instructions in the manual.
What warranty does this product have?
The WM/X comes with a 2-year limited warranty against defects in materials and workmanship. Registration may extend the warranty.
User questions about WM/X Lectrosonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WM/X - Lectrosonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WM/X by Lectrosonics.
USER MANUAL WM/X Lectrosonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lectrosonics
Model : WM/X
Category : Uncategorized