CSD2X2U-V2 - Loudspeaker Bogen - Free user manual and instructions
Find the device manual for free CSD2X2U-V2 Bogen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Bogen |
| Model | CSD2X2U-V2 |
| Product Type | Ceiling Loudspeaker |
| Application | Commercial paging and background music |
| Driver Configuration | 2-way (woofer and tweeter) |
| Impedance | 8 ohms (nominal) |
| Transformer Taps | 70V/100V: 1.5W, 3W, 6W, 12W, 25W, bypass |
| Power Handling (RMS) | 30 watts (low impedance) |
| Frequency Response | 70 Hz – 20 kHz |
| Sensitivity | 90 dB (1W/1m) |
| Dimensions (H x W x D) | 6.5 x 23.6 x 23.6 in (165 x 600 x 600 mm) |
| Cutout Size | 22.5 x 22.5 in (572 x 572 mm) |
| Weight | 9.5 lbs (4.3 kg) |
| Mounting | Fits standard 2x2 ft (600x600 mm) ceiling grid |
| Material | Steel backcan, ABS baffle, metal grille |
| Color | White (paintable) |
| Safety Compliance | UL 1480, UL 2043, plenum rated |
| Environmental Protection | For indoor use only, 0°C to 40°C |
| Included Accessories | C-rings, tile bridges, cutout template, wire connectors |
| Cleaning Instructions | Wipe with dry cloth; do not use solvents |
| Repair and Parts | Contact Bogen technical support for replacement drivers or transformers |
| Warranty | Limited 2 years |
Frequently Asked Questions - CSD2X2U-V2 Bogen
What is the impedance of the CSD2X2U-V2?
The nominal impedance is 8 ohms when used in low-impedance mode. It also includes a 70V/100V transformer for distributed audio systems.
How do I wire the speaker for 70V systems?
Connect the amplifier output to the speaker's input terminals. Select the desired power tap (1.5W, 3W, 6W, 12W, 25W) by moving the tap switch. Ensure total connected wattage does not exceed amplifier power.
Can the speaker be painted?
Yes, the grille and baffle are paintable. Use a high-quality spray paint and mask the driver area to prevent damage.
What is the cutout size required?
The cutout size is 22.5 x 22.5 inches (572 x 572 mm) for standard 2x2 ft ceiling tiles.
Is the CSD2X2U-V2 suitable for outdoor use?
No, this speaker is designed for indoor use only in dry locations. It is not weatherproof.
How do I adjust volume for individual speakers?
In 70V systems, volume is adjusted by selecting a different power tap. For low-impedance systems, use an external volume control rated for 8 ohms.
What size amplifier do I need for multiple speakers?
Calculate total wattage by summing the tap settings of all speakers. Choose an amplifier with at least 20% more power than total wattage. Ensure impedance loads are within amp specs for low-Z wiring.
Does the speaker include a tile bridge?
Yes, tile bridges and C-rings are included for easy installation in suspended ceilings. Installation instructions can be found in the manual.
What is the frequency response?
The frequency response is 70 Hz to 20 kHz with a sensitivity of 90 dB (1W/1m).
Can I use the CSD2X2U-V2 with a 100V line?
Yes, the transformer supports both 70V and 100V systems. Use the appropriate tap and ensure the amplifier is compatible.
User questions about CSD2X2U-V2 Bogen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual CSD2X2U-V2 - Bogen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CSD2X2U-V2 by Bogen.
USER MANUAL CSD2X2U-V2 Bogen
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bogen
Model : CSD2X2U-V2
Category : Loudspeaker