EH700 - Video projector BENQ - Free user manual and instructions
Find the device manual for free EH700 BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | BenQ |
| Model | EH700 |
| Display Technology | DLP |
| Resolution | 1920 x 1080 (Full HD) |
| Brightness | 3500 ANSI Lumens |
| Contrast Ratio | 15000:1 |
| Lamp Life | Up to 5000 hours (Normal), 10000 hours (SmartEco) |
| Projection Size | 30" to 300" |
| Throw Ratio | 1.15 - 1.50 |
| Zoom | 1.3x Manual |
| Keystone Correction | Vertical ± 40° |
| Input Ports | HDMI (x2), VGA (x2), Composite, S-Video, Audio In |
| Output Ports | VGA Out, Audio Out, USB (Type A for power), RS-232 |
| Speaker | 10W Mono |
| Noise Level | 33 dB (Normal), 28 dB (Eco) |
| Power Consumption | 310W (Normal), <0.5W (Standby) |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (W x D x H) | 312 x 244 x 104 mm |
| Weight | 2.8 kg |
| Maintenance | Clean air filter every 500 hours; replace lamp when prompted |
| Safety | Laser safety class 2, auto power-off after inactivity |
| Spare Parts | Replacement lamp (model: 5J.J8L01.001) and air filter |
| Warranty | 3 years (parts and labor) |
Frequently Asked Questions - EH700 BENQ
How do I connect my laptop to the BenQ EH700 projector?
Connect using an HDMI or VGA cable. Ensure the projector is on and select the correct input source using the remote or control panel.
What is the recommended projection distance for a 100-inch screen?
With a throw ratio of 1.15-1.50, the distance for a 100-inch screen is approximately 2.5 to 3.3 meters.
How do I replace the lamp on the EH700?
Turn off the projector, unplug it, allow it to cool. Remove the lamp cover, unscrew the old lamp, install the new BenQ 5J.J8L01.001 lamp, and reset the lamp timer.
Can the projector be mounted on the ceiling?
Yes, it supports ceiling mounting. Use a compatible mount (e.g., BenQ CM series) and adjust the image orientation via the keystone correction or menu settings.
Why is the projector not turning on?
Check the power cable connection and ensure the power switch is on. If the lamp indicator is red, wait for the lamp to cool or replace it. Also, verify the auto-power-off setting.
How do I clean the air filter?
Turn off and unplug the projector. Locate the filter cover, remove the filter, and clean it with a vacuum cleaner or rinse with water (dry thoroughly before reinstalling). Replace every 500 hours.
What is the maximum screen size supported?
The projector can display images from 30 inches to 300 inches diagonally, depending on distance.
Does the EH700 support 3D content?
Yes, it supports DLP Link 3D with compatible 3D glasses and 120Hz refresh rate. Ensure the source is set to 3D format.
How do I reset the lamp timer?
After replacing the lamp, go to the System Setup menu, select Lamp Settings, and choose Reset Lamp Timer. Confirm the reset.
Can I use the projector with a USB flash drive?
The USB port is for power only (5V/1.5A) and for firmware updates, not for media playback. Use HDMI or VGA for content.
User questions about EH700 BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual EH700 - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EH700 by BENQ.
USER MANUAL EH700 BENQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BENQ
Model : EH700
Category : Video projector