HT3560 - Video projector BENQ - Free user manual and instructions
Find the device manual for free HT3560 BENQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video projector |
| Brand | BenQ |
| Model | HT3560 |
| Display Technology | DLP |
| Resolution | 3840 x 2160 (4K UHD) |
| Brightness | 2000 ANSI lumens |
| Contrast Ratio | 30,000:1 (dynamic) |
| Lamp Life | Up to 15,000 hours (eco mode) |
| Lamp Type | SuperColor RGBRGB |
| Dimensions (W x D x H) | 380 x 277 x 127 mm |
| Weight | 4.8 kg |
| Power Consumption | 350 W (max) |
| Keystone Correction | Vertical ±30°, Horizontal ±30° |
| Lens Shift | Vertical: 0%-15% |
| Zoom & Focus | Manual zoom & focus |
| Throw Ratio | 1.15 ~ 1.50:1 |
| Input Ports | HDMI 2.0b (x2), USB-A (x2), VGA, Audio 3.5mm |
| Output Ports | Audio 3.5mm, SPDIF, USB-A (power only) |
| Audio | Built-in 5W mono speaker |
| Noise Level | 28 dBA (eco mode) |
| Supported HDR | HDR10, HLG |
| 3D | Yes (DLP Link) |
| Maintenance | Cleaning filter periodically; lamp replacement after about 3000-15000 hours |
| Accessories Included | Remote control, power cord, quick start guide, user manual |
Frequently Asked Questions - HT3560 BENQ
How to connect the BenQ HT3560 to a laptop?
Use an HDMI cable to connect from your laptop's HDMI output to one of the projector's HDMI ports. Ensure the projector is set to the correct input source using the remote or menu.
What is the recommended projection distance for a 100-inch screen?
For a 100-inch diagonal screen, the throw distance is approximately 2.5 to 3.3 meters, based on the throw ratio of 1.15-1.50:1.
How can I adjust the image keystone?
Go to Picture settings in the menu, select Keystone, and adjust vertical and horizontal keystone using the remote or buttons on the projector.
How to replace the lamp on the HT3560?
Turn off and unplug the projector. Wait 30 minutes for cooling. Remove the lamp cover screw, slide out the old lamp module, insert a new BenQ original lamp, and secure the cover.
Why is the projector not showing any image?
Check the power cable, ensure the lens cap is removed, and verify the input source is correctly selected. If using HDMI, try a different cable or port. Also check if the lamp has exceeded its life.
Does the HT3560 support 4K HDR content?
Yes, the projector supports HDR10 and HLG formats. Make sure your source device and HDMI cable are compatible with 4K HDR.
How to clean the air filter?
Turn off and unplug the projector. Locate the filter cover on the side, remove the filter, clean it with a soft brush or vacuum (do not wash with water), and reinstall.
Can I use the projector for gaming?
Yes, the HT3560 has a low input lag mode (Game mode) suitable for casual gaming. Enable it in the Picture settings for reduced latency.
What is the maximum supported resolution?
The native resolution is 3840x2160 (4K UHD). It can also accept lower resolutions such as 1080p and scale them accordingly.
How to update the firmware?
Firmware updates are rare; check BenQ's official support website for your model. If available, download the file to a USB drive, insert it into the USB port, and follow the on-screen instructions in the Service menu.
User questions about HT3560 BENQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual HT3560 - BENQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HT3560 by BENQ.
USER MANUAL HT3560 BENQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BENQ
Model : HT3560
Category : Video projector