Crestron

CEN-SWPOE-5AC - Uncategorized Crestron - Free user manual and instructions

Find the device manual for free CEN-SWPOE-5AC Crestron in PDF.

📄 29 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Crestron CEN-SWPOE-5AC - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeManaged PoE+ Network Switch
Number of Ports5 Gigabit Ethernet (PoE+ on all ports)
PoE Budget65W total, up to 30W per port (IEEE 802.3at)
Dimensions (W x D x H)8.4 x 5.2 x 1.7 inches (213 x 132 x 43 mm)
Weight1.5 lbs (0.68 kg)
Power Input100-240V AC, 50/60 Hz, 0.5A (external power supply included)
Power Consumption15W (without PoE load), max 80W (with full PoE load)
Switching Capacity10 Gbps
MAC Address Table8K entries
ManagementWeb-based GUI, SNMP, CLI via console port
VLAN Support802.1Q VLAN, up to 64 VLANs
Quality of Service802.1p, DSCP, port-based
Operating Temperature32°F to 104°F (0°C to 40°C)
Operating Humidity10% to 90% (non-condensing)
MountingRack-mountable (1U), desktop or wall-mount optional
Safety ComplianceUL, CE, FCC Class A
Warranty3 years limited
Maintenance & CleaningDisconnect power before cleaning; use dry cloth; avoid liquids
Spare Parts & RepairabilityNo user-serviceable parts; contact Crestron for RMA
Additional FeaturesIGMP snooping, port mirroring, loop protection, PoE scheduling

Frequently Asked Questions - CEN-SWPOE-5AC Crestron

What is the power budget for PoE on the CEN-SWPOE-5AC?
The total PoE budget is 65W, with a maximum of 30W per port (IEEE 802.3at PoE+).
Can I mount this switch in a rack?
Yes, the CEN-SWPOE-5AC is 1U rack-mountable and includes rack-mount ears. It can also be used on a desktop or mounted to a wall.
Does this switch support VLANs?
Yes, it supports 802.1Q VLANs with up to 64 active VLANs. Configuration is done via the web interface.
What type of power supply is required?
The switch comes with an external power supply that accepts 100-240V AC, 50/60 Hz. The switch itself consumes 15W without PoE and up to 80W maximum when powering PoE devices.
How many MAC addresses can the switch learn?
The MAC address table can store up to 8,000 entries, suitable for small to medium networks.
Is the switch managed or unmanaged?
It is a fully managed switch with features like VLAN, QoS, SNMP, and CLI access. Management is done via web GUI, Telnet, SSH, or console port.
What is the maximum cable length for Ethernet?
Standard Cat5e or higher cable supports up to 100 meters (328 feet) per segment.
Can I use this switch to power Crestron touchpanels?
Yes, many Crestron touchpanels and devices with PoE+ support can be powered directly by this switch, as long as their power requirements are within 30W per port.
What cleaning method is recommended?
Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use any liquids or sprays.
Is there a warranty, and how do I get repairs?
The switch comes with a 3-year limited warranty. There are no user-serviceable parts inside. For repairs, contact Crestron support for an RMA authorization.

User questions about CEN-SWPOE-5AC Crestron

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual CEN-SWPOE-5AC - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CEN-SWPOE-5AC by Crestron.

USER MANUAL CEN-SWPOE-5AC Crestron

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Crestron

Model : CEN-SWPOE-5AC

Category : Uncategorized