251K - Sewing machine SINGER - Free user manual and instructions
Find the device manual for free 251K SINGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sewing Machine |
| Brand | Singer |
| Model | 251K |
| Manufacturing Era | 1950s-1960s |
| Dimensions (L x W x H) | 40 x 20 x 30 cm (approx) |
| Weight | 10 kg (approx) |
| Power Supply | 100-120 V AC, 60 Hz |
| Motor Power | 100 W (approx) |
| Stitch Type | Straight stitch (basic) |
| Stitch Length Adjustment | Manual dial, adjustable |
| Bobbin Type | Drop-in or side-loading (class 15) |
| Needle System | 15x1 or 130/705H |
| Presser Foot | Standard snap-on |
| Maximum Sewing Speed | Approximately 800-1000 stitches per minute |
| Extra Features | Manual bobbin winder, feed dog drop (for darning) |
| Maintenance | Oil periodically; clean lint and dust |
| Safety Features | Foot pedal control; hand wheel lock |
| Spare Parts Availability | Common parts still available online |
| Repairability | Moderate; many repair guides available |
Frequently Asked Questions - 251K SINGER
How do I thread the Singer 251K sewing machine?
Raise the presser foot. Place spool on pin, guide thread through top tension disc, then through the take-up lever, then through the needle eye from front to back. Ensure the thread is between the tension discs.
How do I adjust the thread tension?
Turn the tension dial near the top of the machine. Increase tension by turning clockwise for tighter stitches, or counterclockwise for looser fabric. Always adjust with the presser foot up.
How do I wind the bobbin?
Place empty bobbin on winder spindle. Disengage the hand wheel by turning the clutch knob to the left. Guide thread from spool through bobbin winder tension then to bobbin. Push winder arm down. Start sewing slowly until full, then release.
Why is my machine skipping stitches?
Common causes: dull or bent needle, incorrect needle type, improper threading, or tension too tight. Try replacing the needle, rethreading, and adjusting tension. Also ensure the fabric is not being pulled.
How do I clean and oil the Singer 251K?
Remove needle and presser foot. Dust lint from bobbin area and feed dogs. Apply sewing machine oil to all designated oil holes (usually marked with arrows) and to the shuttle race. Use only sewing machine oil. Wipe excess.
How do I change the needle?
Turn hand wheel to raise needle to highest position. Loosen needle clamp screw. Remove old needle. Insert new needle with flat side facing back (for most models). Tighten screw securely.
What type of needle does the 251K use?
The Singer 251K uses standard household needles, size 15x1 or 130/705H. Choose needle size based on fabric weight (e.g., 80/12 for medium fabrics).
How do I adjust the stitch length?
Locate the stitch length dial on the front of the machine. Turn it to higher numbers for longer stitches, lower numbers for shorter. Reverse stitch may be available with a lever.
Why is my machine jamming?
Turn off or unplug. Check for tangled thread in bobbin area. Remove bobbin case and clear any lint or thread snags. Ensure needle is not bent and is fully inserted. Re-thread carefully.
Where can I find a manual for the Singer 251K?
You can download a free PDF manual from websites like manualslib.com or singer.com support. Also, many vintage sewing machine blogs offer guides. The manual includes detailed threading and maintenance instructions.
User questions about 251K SINGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual 251K - SINGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 251K by SINGER.
USER MANUAL 251K SINGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SINGER
Model : 251K
Category : Sewing machine