American DJ

ENCORE LB15IP - Lighting American DJ - Free user manual and instructions

Find the device manual for free ENCORE LB15IP American DJ in PDF.

📄 38 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice American DJ ENCORE LB15IP - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeBattery-Powered LED Wash Light
BrandAmerican DJ
ModelENCORE LB15IP
Dimensions (L x W x H)15.7 x 3.9 x 6.3 in (40 x 10 x 16 cm)
Weight9.5 lbs (4.3 kg)
Power SupplyAC 100-240V, 50/60Hz
Power Consumption150W max
BatteryInternal rechargeable Li-Ion, 10 hours runtime
LED Type15 x 15W RGBWA+UV LEDs
Beam Angle25°
IP RatingIP65 (dust and water resistant)
ControlDMX, Master/Slave, Sound Active, Auto
DMX Channels10/14/58/102 channels
DisplayOLED with capacitive touch buttons
Housing MaterialAluminum with tempered glass lens
Mounting OptionsFloor stand, truss clamp, or hanging kit
Operating Temperature14°F to 113°F (-10°C to 45°C)
CoolingPassive convection (no fan)
MaintenanceClean lens with soft dry cloth; avoid solvents
Safety FeaturesOverheat protection, safety cable attachment point
Spare PartsBattery, LED modules, power supply available
RepairabilityField-serviceable components; user manual provided

Frequently Asked Questions - ENCORE LB15IP American DJ

How do I reset the ENCORE LB15IP to factory defaults?
Press and hold the MENU button for 5 seconds until the display shows 'Factory Reset'. Confirm with ENTER.
What power source can I use?
The fixture can operate on AC 100-240V via the included power cord or on internal battery for up to 10 hours.
How do I set DMX addressing?
Enter the menu, select DMX Settings, then DMX Address. Use the arrow keys to set the address and press ENTER.
Can I use the fixture outdoors?
Yes, the ENCORE LB15IP has an IP65 rating, making it suitable for outdoor use but not submersion.
How to charge the battery?
Connect the AC power cord to the fixture and wall outlet. The battery indicator on the display shows charging status. A full charge takes about 4 hours.
How do I perform a sound active show?
Set the fixture to Sound Active mode via the menu. The built-in microphone will trigger lighting effects in response to music.
What is the maximum number of daisy-chained units?
You can daisy-chain up to 32 units using DMX cables. Ensure proper termination on the last fixture.
How to replace a failed LED?
Remove the lens cover by unscrewing the side screws. The LED modules are field-replaceable; disconnect the old module and snap in a new one. Reassemble and test.
Why is my fixture not turning on?
Check that the battery is charged or AC power is connected. Also ensure the power switch on the back is in the ON position.
How do I update the firmware?
Download the latest firmware from the American DJ website. Connect the fixture to a computer via USB (use the service port) and follow the update tool instructions.

User questions about ENCORE LB15IP American DJ

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual ENCORE LB15IP - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ENCORE LB15IP by American DJ.

USER MANUAL ENCORE LB15IP American DJ

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : American DJ

Model : ENCORE LB15IP

Category : Lighting