Dotz Matrix - Lighting American DJ - Free user manual and instructions
Find the device manual for free Dotz Matrix American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Matrix Effect Light |
| Brand | American DJ |
| Model | Dotz Matrix |
| LED Type | 37 x 3W RGBW LEDs |
| Total LED Power | 111 W |
| Beam Angle | 25 degrees |
| Strobe Rate | 0 - 20 Hz |
| Control Modes | DMX, Master/Slave, Auto, Sound Active |
| DMX Channels | 9 channels |
| Power Consumption | 120 W |
| Input Voltage | 100 - 240 V AC, 50/60 Hz |
| Dimensions (L x W x H) | 11.2 x 11.2 x 11.2 in (285 x 285 x 285 mm) |
| Weight | 8.5 lbs (3.9 kg) |
| Cooling | Fan cooled |
| Housing Material | Impact-resistant plastic |
| Mounting Options | Floor standing or hanging with included bracket |
| Included Accessories | Power cord, mounting bracket, user manual |
| Safety Certifications | ETL, CE |
| Maintenance | Clean with dry cloth; avoid liquids |
| Repairability | Replaceable LEDs, fan, power supply |
Frequently Asked Questions - Dotz Matrix American DJ
How do I connect multiple Dotz Matrix units together?
Use DMX cables to daisy-chain units. Set the first as Master and others as Slave via the control panel.
What DMX channel mode should I use?
Use 9-channel mode for full control. For simpler setups, 3-channel mode is available for RGB control.
How to reset the fixture to factory defaults?
Press and hold the Menu button for 5 seconds until the display shows 'Reset'. Confirm with Enter.
Why is the light not responding to DMX?
Check DMX cable connections, ensure the fixture is in DMX mode, and verify the DMX address matches the controller.
How to clean the Dotz Matrix?
Turn off and unplug. Use a soft dry cloth to wipe the housing and lens. Do not use liquids or solvents.
What is the maximum ambient temperature for operation?
Operate in an ambient temperature between 14°F and 104°F (-10°C to 40°C). Avoid direct sunlight.
Can the fixture be mounted upside down?
Yes, it can be mounted in any orientation using the included mounting bracket. Ensure secure attachment.
How to update firmware?
Download the latest firmware from americandj.com. Connect via USB (if supported) and follow the update instructions.
What power cable is needed?
Use the included IEC power cord rated for 100-240V. Do not use extension cords unless rated for the load.
How to adjust the strobe speed?
In DMX mode, use channel 8 (typically) to adjust strobe speed from slow to fast. In standalone mode, use the control panel.
User questions about Dotz Matrix American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Dotz Matrix - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Dotz Matrix by American DJ.
USER MANUAL Dotz Matrix American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : Dotz Matrix
Category : Lighting