12P HEX IP - Lighting American DJ - Free user manual and instructions
Find the device manual for free 12P HEX IP American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Can (Outdoor) |
| Model | 12P HEX IP |
| Brand | American DJ |
| Light Source | 12 x 6W HEX LED (Red, Green, Blue, Amber, White, UV) |
| Beam Angle | 25° |
| Color Mixing | RGBAWUV (6-color) |
| DMX Modes | 9-channel and 11-channel modes |
| Operating Modes | DMX, Master/Slave, Sound Active, Auto |
| IP Rating | IP65 (dust-tight and water-jet protected) |
| Power Consumption | 90W |
| Input Voltage | 100-240V AC, 50/60Hz |
| Housing | Die-cast aluminum with tempered glass |
| Display | OLED display |
| Cooling | Convection, no fans |
| Dimensions (W x D x H) | 270 x 220 x 310 mm |
| Weight | 4.5 kg (approx.) |
| Power Connections | Locking powerCON in/out |
| Included Accessories | Mounting bracket, power cable, safety cable, user manual |
| Maintenance | Clean lens and housing with a soft damp cloth; check bracket screws periodically |
| Safety | Disconnect power before servicing; use safety cable; avoid direct eye exposure |
| Reparability | Modular LED and PCB design for easy field replacement |
| Certifications | CE, RoHS |
Frequently Asked Questions - 12P HEX IP American DJ
How do I set the DMX address on the American DJ 12P HEX IP?
Use the OLED display and menu buttons. Press MENU to enter the menu, navigate to DMX Address or ADDR, then use the UP/DOWN buttons to set the desired DMX channel. Press ENTER to save. The fixture will then respond to DMX values starting from that address depending on the selected DMX mode.
What DMX channel modes does the 12P HEX IP support?
The fixture offers a 9-channel mode and an 11-channel mode. The 9-channel mode controls dimmer, strobe, red, green, blue, amber, white, UV, and a color macro channel. The 11-channel mode provides additional control over color macros, fade speed, or a virtual color wheel.
Can I use this fixture outdoors in the rain?
Yes, the 12P HEX IP has an IP65 rating, meaning it is fully protected against dust and low-pressure water jets. It can be used outdoors without a protective housing, but avoid submerging it in water.
How do I link multiple fixtures in master/slave mode?
Connect all slave fixtures to the master using DMX cables (3-pin XLR). Set all slaves to Slave mode via the menu. Set the master to either Master or Sound Active mode, and it will transmit control signals to the slaves so they follow the master's programs.
How do I use sound active mode?
Set the fixture to Sound Active mode from the main menu. The built-in microphone will pick up bass frequencies and trigger the color and strobe patterns. To change the program, use the menu to cycle through embedded sound-activated programs. Ensure the volume and sensitivity are adjusted appropriately.
What type of power does the fixture need?
The fixture uses a universal switching power supply that accepts 100-240V AC, 50/60Hz. This allows it to be used worldwide without a bulky transformer. Always connect it to a grounded outlet.
How should I clean the 12P HEX IP?
Use a soft, lint-free damp cloth to clean the front lens and the housing. Avoid solvents or abrasive cleaners. Regular cleaning of the air vents and lens is essential for optimal output and heat dissipation.
Why is the fixture not responding to DMX?
First check the DMX cable connections; use a quality 3-pin XLR cable. Verify the DMX address is correctly set and does not conflict with other devices. Make sure the DMX mode is set to DMX (not Master/Slave or Sound Active). Also, confirm the unit is powered and the display is lit. If multiple fixtures are linked, ensure the last fixture has a terminator (120 ohm resistor) installed.
Can I replace the LED modules myself?
Yes, the LED boards are modular and designed for field replacement. They require basic soldering skills and appropriate safety precautions. Turn off power and wait for the unit to cool before opening the housing. Replacement parts can be sourced from American DJ dealers.
What is the best way to mount the 12P HEX IP?
The fixture comes with a heavy-duty mounting bracket that supports both floor and hanging installation. Use the bracket's mounting holes to secure the fixture to a truss or stand. Always use a safety cable as a secondary attachment to prevent drops, and tighten the repositioning knobs securely to avoid tilting.
User questions about 12P HEX IP American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual 12P HEX IP - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 12P HEX IP by American DJ.
USER MANUAL 12P HEX IP American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : 12P HEX IP
Category : Lighting