24MH2Y-P - Screen AOPEN - Free user manual and instructions
Find the device manual for free 24MH2Y-P AOPEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Monitor |
| Screen size | 23.8 inches |
| Resolution | 1920 x 1080 (Full HD) |
| Refresh rate | 75 Hz |
| Panel type | IPS |
| Aspect ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast ratio | 1000:1 (typical) |
| Response time | 4 ms (GTG) |
| Viewing angles | 178° / 178° |
| Connectivity | 1 x HDMI 1.4, 1 x VGA, 1 x Audio Out |
| VESA mount | 100 x 100 mm |
| Tilt adjustment | -5° to 20° |
| Special features | Flicker-free, Blue light filter, Acer VisionCare |
| Power consumption | 21 W (typical), 0.5 W (standby) |
| Dimensions (with stand) | 540 x 420 x 190 mm |
| Weight (with stand) | 4.2 kg |
| Cleaning | Wipe with a soft, dry cloth. Do not use harsh chemicals. |
| Safety | Place on a stable surface, avoid direct sunlight, ensure ventilation. |
| Spare parts | Contact AOpen support for replacement stands or power adapters. |
Frequently Asked Questions - 24MH2Y-P AOPEN
How do I connect my PC to the monitor?
Connect your PC using an HDMI or VGA cable. Ensure the monitor is powered on and select the correct input source via the OSD menu.
The monitor screen is blank or no signal. What should I do?
Check that the power cable is securely connected. Verify the video cable is attached to both the monitor and PC. Press the input button to cycle through sources. If the issue persists, test with another cable or device.
How do I adjust the brightness or contrast?
Press the Menu button on the monitor to open the OSD. Use the navigation keys to go to 'Picture' and adjust Brightness and Contrast as desired.
How can I enable the blue light filter?
Open the OSD menu, go to 'Color' or 'Picture', and select 'Blue Light' or 'VisionCare'. Toggle it on to reduce eye strain.
Can I mount this monitor on a wall?
Yes, it supports VESA 100 x 100 mm mounts. Remove the stand and attach a compatible wall mount arm.
What is the ideal way to clean the screen?
Use a soft, dry microfiber cloth. For stubborn smudges, slightly dampen the cloth with water. Do not spray liquids directly on the screen or use alcohol/ammonia.
The colors look off. How can I calibrate the display?
Access the OSD and navigate to 'Color' settings. You can adjust color temperature, gamma, and RGB values. For accurate calibration, use a hardware calibrator.
Why is there flickering on the screen?
Flickering may occur if the refresh rate is mismatched. Ensure your PC's output matches the monitor's 75 Hz. Also, check that Flicker-free mode is enabled in the OSD.
How do I reset the monitor to factory settings?
Press the Menu button, go to 'System' or 'OSD Settings', and select 'Reset' or 'Factory Reset'. Confirm the action to restore default settings.
Is there a warranty on this monitor?
AOpen typically offers a 3-year limited warranty. Contact AOpen support or your retailer for warranty service. Keep your purchase receipt.
User questions about 24MH2Y-P AOPEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screen in PDF format for free! Find your manual 24MH2Y-P - AOPEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 24MH2Y-P by AOPEN.
USER MANUAL 24MH2Y-P AOPEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AOPEN
Model : 24MH2Y-P
Category : Screen