Nero HTD6150 - Receiver OSD Audio - Free user manual and instructions
Find the device manual for free Nero HTD6150 OSD Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Theater Receiver |
| Brand | OSD Audio |
| Model | Nero HTD6150 |
| Power Output per Channel | 100 Watts (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Number of Channels | 5.1 |
| Supported Audio Formats | Dolby Digital, DTS, PCM |
| Impedance | 8 ohms |
| HDMI Inputs / Output | 3 inputs / 1 output |
| Analog Audio Inputs | 2 stereo pairs (RCA) |
| Tuner | FM/AM with 30 presets |
| Bluetooth | Yes, version 4.0 |
| Dimensions (W x D x H) | 17.1 x 12.2 x 5.9 inches (435 x 310 x 150 mm) |
| Weight | 18.5 lbs (8.4 kg) |
| Power Supply | AC 120V / 60Hz |
| Power Consumption | 350W (standby: 0.5W) |
| Frequency Response | 20Hz - 20kHz (±1dB) |
| Signal-to-Noise Ratio | 90 dB (IHF-A) |
| Remote Control | Included (IR) |
| Auto Calibration | Yes (microphone included) |
| Cleaning and Maintenance | Wipe with a soft, dry cloth. Do not use liquid cleaners. |
| Safety | Do not expose to moisture or extreme temperatures. Ensure proper ventilation. |
| Spare Parts / Repairability | Remote, antenna, and fuse available. Repairs by authorized service. |
Frequently Asked Questions - Nero HTD6150 OSD Audio
How do I connect the receiver to my TV?
Use an HDMI cable from the receiver's HDMI output to your TV's HDMI input. Select the corresponding input on your TV.
How do I set up the speakers?
Connect each speaker to the corresponding color-coded terminals: front left/right, center, and surround. Ensure correct polarity (+/-). Run the auto-calibration with the included microphone for optimal sound.
How do I use Bluetooth?
Press the Bluetooth button on the remote or front panel. Enable Bluetooth on your device and select 'OSD Nero HTD6150' from the list. Pairing is automatic.
What is the power output of the receiver?
The receiver delivers 100 watts per channel into 8 ohms, 20Hz-20kHz, with 0.08% THD. This is sufficient for most home theater setups.
How do I reset the receiver to factory settings?
Press and hold the Power button and the Tone button simultaneously for 5 seconds. The display will show 'Factory Reset'. Confirm by pressing Enter.
Can I use a subwoofer with this receiver?
Yes, the receiver has a dedicated subwoofer pre-out (RCA). Connect your powered subwoofer to this output. The crossover frequency can be set in the menu.
How do I update the firmware?
Firmware updates are done via USB. Download the latest firmware from OSD Audio support, copy it to a USB drive, insert into the receiver, and follow the on-screen instructions.
What audio formats are supported?
The receiver supports Dolby Digital, DTS, and standard PCM. It can decode up to 5.1 channels from HDMI and optical inputs.
How do I clean the receiver?
Unplug the receiver and wipe the exterior with a soft, dry cloth. Do not use any liquid or abrasive cleaners. Ensure ventilation slots are free of dust.
Does the receiver come with a remote control?
Yes, a full-function remote control is included. It allows control of power, volume, input selection, and other settings. Batteries (AAA) are included.
User questions about Nero HTD6150 OSD Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Nero HTD6150 - OSD Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Nero HTD6150 by OSD Audio.
USER MANUAL Nero HTD6150 OSD Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OSD Audio
Model : Nero HTD6150
Category : Receiver