XMP100BT GEN2 - Receiver OSD Audio - Free user manual and instructions
Find the device manual for free XMP100BT GEN2 OSD Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth Receiver / Amplifier |
| Brand | OSD Audio |
| Model | XMP100BT GEN2 |
| Dimensions (W x H x D) | 7.0 x 5.0 x 2.0 inches |
| Weight | 1.5 lbs |
| Power Supply | AC Adapter (Input 100-240V, Output 12V 2A) |
| Power Output | 50W x 2 (Stereo) |
| Bluetooth Version | 5.0 |
| Bluetooth Range | Up to 30 feet (10 meters) |
| Audio Inputs | Bluetooth, AUX (3.5mm), USB (for charging only) |
| Audio Outputs | Speaker terminals (binding posts), RCA subwoofer output |
| Supported Audio Codecs | SBC, AAC |
| Impedance | 4-8 ohms |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | > 90 dB |
| Total Harmonic Distortion | < 0.1% |
| Controls | Power, Volume, Source, Play/Pause, Track Skip |
| Indicators | Power LED, Bluetooth LED |
| Mounting Options | Desktop, shelf, or wall mount (bracket not included) |
| Cooling | Passive ventilation |
| Operating Temperature | 32°F - 104°F (0°C - 40°C) |
| Storage Temperature | -4°F - 140°F (-20°C - 60°C) |
| Included Accessories | Power adapter, remote control (battery included), user manual |
| Maintenance | Wipe with a dry, soft cloth. Do not use liquid cleaners. |
| Safety Precautions | Keep away from water, do not block ventilation, use only specified power supply. |
| Spare Parts & Repairability | Contact OSD Audio support for replacement parts or authorized service. |
| Warranty | 2 years limited |
| General Information | Ideal for outdoor/indoor audio streaming. Compatible with most passive speakers. |
Frequently Asked Questions - XMP100BT GEN2 OSD Audio
How do I pair my phone with the XMP100BT GEN2?
Turn on the receiver and press the Bluetooth button. The LED will flash. On your phone, enable Bluetooth and select 'XMP100BT' from the list. Once paired, the LED becomes solid.
What is the maximum power output?
The receiver delivers 50W per channel into 4-8 ohm speakers, for a total of 100W stereo.
Can I use it with outdoor speakers?
Yes, it is designed for both indoor and outdoor use, but keep it protected from direct rain and moisture.
How do I reset the device?
If experiencing issues, press and hold the power button for 10 seconds to reset. Alternatively, unplug the power adapter for 30 seconds.
Does it support aptX?
No, it supports SBC and AAC codecs, which provide good quality for most users.
Can I connect a subwoofer?
Yes, it has an RCA subwoofer output. You can connect a powered subwoofer for enhanced bass.
What is the Bluetooth range?
The effective range is up to 30 feet (10 meters) with a clear line of sight. Walls and obstacles may reduce the range.
Is there a remote control?
Yes, a remote control is included with a battery. It allows volume control, track skip, and source switching.
How do I clean the receiver?
Use a dry, soft cloth to wipe the surface. Do not use water, alcohol, or any liquid cleaners.
What should I do if the sound is distorted?
Check speaker impedance (4-8 ohms) and ensure the volume is not too high. Reduce the source volume and increase receiver volume gradually.
User questions about XMP100BT GEN2 OSD Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual XMP100BT GEN2 - OSD Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XMP100BT GEN2 by OSD Audio.
USER MANUAL XMP100BT GEN2 OSD Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OSD Audio
Model : XMP100BT GEN2
Category : Receiver