Origins S6960B - Faucet Symmons - Free user manual and instructions
Find the device manual for free Origins S6960B Symmons in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Faucet |
| Brand | Symmons |
| Model | Origins S6960B |
| Finish | Brushed Nickel (typical) |
| Material | Brass |
| Handle Type | Single Lever |
| Spout Height | Approximately 7.5 inches |
| Spout Reach | Approximately 5.5 inches |
| Flow Rate | 1.5 GPM (max) |
| Number of Holes | 1 (single hole installation) |
| Valve Type | Cartridge (ceramic disc) |
| Mounting Type | Deck mount |
| Warranty | Lifetime limited warranty |
| Weight | Approximately 3.5 lbs |
| Dimensions | 8.5 x 5.5 x 3 inches (LxWxH) |
| Included Components | Faucet, mounting hardware, supply lines |
| Certifications | ASME A112.18.1, NSF 61 |
| Care Instructions | Clean with mild soap and water; avoid abrasive cleaners |
| Repairability | Replacement cartridges and parts available |
Frequently Asked Questions - Origins S6960B Symmons
How do I install the Symmons Origins S6960B faucet?
Installation requires a single hole in the countertop. Follow the included instructions: insert the faucet through the hole, secure with mounting nut, connect supply lines to shut-off valves, and turn on water. Ensure all connections are tight.Use Teflon tape on threads if needed.
What is the flow rate of this faucet?
The maximum flow rate is 1.5 gallons per minute (GPM), compliant with low-flow regulations.
How do I replace the cartridge?
Turn off water supply. Remove handle screw (set screw under cap) and lift handle. Unscrew retaining nut, pull out old cartridge, insert new one (make sure alignment matches). Reassemble and test.Use a genuine Symmons cartridge for best performance.
Why is my faucet leaking?
Common causes: worn cartridge, loose connections, or debris in valve. First check if handle is fully closed. If leak persists, replace cartridge. Also check supply line connections.Always turn off water before inspecting.
How do I clean the faucet?
Clean with a soft cloth and mild dish soap. Rinse thoroughly. Do not use abrasive cleaners, steel wool, or chemicals containing bleach or ammonia.Dry with a soft towel to prevent water spots.
Is this faucet compatible with a 3-hole sink?
The S6960B is designed for single-hole installation. For a 3-hole sink, you can use an optional deck plate (escutcheon) to cover extra holes, but the faucet itself mounts in one hole.
What is the warranty coverage?
Symmons offers a lifetime limited warranty against defects in material and workmanship. This covers replacement parts but not finish damage from cleaning products. Register online for warranty service.
Can I use this faucet with a tankless water heater?
Yes, it is compatible with standard residential plumbing, including tankless heaters.Ensure flow rate meets heater's minimum activation requirement (usually 0.5 GPM).
How do I remove mineral deposits?
For tough deposits, use a solution of equal parts white vinegar and water. Soak a cloth in the solution and wrap around affected area for 10-15 minutes, then rinse and wipe clean. Avoid vinegar on brushed finishes; use mild soap.
What tools are needed for installation?
Basic tools: adjustable wrench, basin wrench, Phillips screwdriver, plumber's tape. Some installations may require a drill with 1-1/4 inch hole saw if hole not pre-drilled.
User questions about Origins S6960B Symmons
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Faucet in PDF format for free! Find your manual Origins S6960B - Symmons and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Origins S6960B by Symmons.
USER MANUAL Origins S6960B Symmons
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Symmons
Model : Origins S6960B
Category : Faucet