ERS 600 - Loudspeaker INFINITY - Free user manual and instructions
Find the device manual for free ERS 600 INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-way bookshelf loudspeaker |
| Brand | Infinity |
| Model | ERS 600 |
| Dimensions (W x H x D) | 9.5 x 15.5 x 10.25 inches |
| Weight | 18.5 lbs each |
| Frequency Response | 45 Hz - 25 kHz ±3 dB |
| Impedance | 8 ohms nominal |
| Sensitivity | 90 dB (2.83V/1m) |
| Power Handling (RMS) | 150 watts |
| Power Handling (Peak) | 300 watts |
| Crossover Frequency | 2,500 Hz |
| Driver Configuration | 1-inch soft dome tweeter, 6.5-inch Polypropylene woofer |
| Enclosure Type | Rear ported bass reflex |
| Recommended Amplifier Power | 30 - 200 watts per channel |
| Inputs | Gold-plated binding posts |
| Finish | Black ash vinyl |
| Grille | Removable black cloth grille |
| Magnetic Shielding | Yes |
| Cleaning Instructions | Wipe with a dry, soft cloth; do not use solvents |
| Safety Warnings | Place on stable surface; keep away from moisture and heat sources |
Frequently Asked Questions - ERS 600 INFINITY
What is the ideal placement for the Infinity ERS 600 speakers?
Place the speakers on a sturdy shelf or stand at ear level, at least 8 inches from the back wall to allow proper bass reflex port operation. Avoid corners to reduce bass boom.
Can I use the ERS 600 with a subwoofer?
Yes, these speakers are designed to work with a subwoofer. Set your receiver's crossover to around 80 Hz for seamless integration.
How do I clean the speaker grille?
Remove the grille gently. Use a soft brush or vacuum with a brush attachment to remove dust. For stains, lightly dampen a cloth with mild soap and water, then blot dry.
What type of amplifier is recommended for these speakers?
Any high-quality amplifier delivering 30 to 200 watts per channel at 8 ohms will drive the ERS 600 effectively. Avoid clipping or distortion.
Are the Infinity ERS 600 speakers magnetically shielded?
Yes, they are magnetically shielded, allowing placement near CRT televisions and other sensitive electronics without interference.
What is the warranty period for the ERS 600?
Infinity typically offers a 5-year limited warranty for speakers. Check your local dealer or registration card for exact terms.
Can I bi-wire or bi-amp these speakers?
The ERS 600 has single binding posts, so bi-wiring is not possible unless you modify the crossover. Use standard single-wire connections.
How do I break in new speakers?
Play music at moderate volume for 20-30 hours. This allows the driver suspensions to loosen and improves overall sound quality.
What should I do if one speaker sounds distorted?
Check all connections and ensure the speaker wires are not touching. If the problem persists, test the speaker on another amplifier channel. Distortion may indicate a damaged driver.
Are replacement parts available for the ERS 600?
Yes, replacement tweeters and woofers can be ordered through Infinity authorized service centers. Contact Infinity support for part numbers.
User questions about ERS 600 INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual ERS 600 - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ERS 600 by INFINITY.
USER MANUAL ERS 600 INFINITY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INFINITY
Model : ERS 600
Category : Loudspeaker