Kappa 62ix - Loudspeaker INFINITY - Free user manual and instructions
Find the device manual for free Kappa 62ix INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Component Speaker System |
| Size | 6.5 inches (165 mm) |
| Configuration | 2-Way (Woofer + Tweeter) |
| Woofer Material | Polypropylene Cone with Rubber Surround |
| Tweeter Type | 1-inch Dome (Textile or Mylar) |
| Impedance | 4 ohms |
| Power Handling (RMS) | 60 Watts |
| Power Handling (Peak) | 180 Watts |
| Sensitivity | 92 dB @ 1W/1m |
| Frequency Response | 45 Hz – 21 kHz |
| Mounting Depth | 2.5 inches (63 mm) |
| Cutout Diameter | 5.7 inches (145 mm) |
| Weight (per speaker) | 3.5 lbs (1.6 kg) |
| Recommended Amplifier Power | 15 – 120 Watts RMS per channel |
| Crossover | External 12 dB/octave (included) |
| Mounting Style | Coaxial or Component (using included brackets) |
| Voice Coil | 1.5-inch (38 mm) Kapton |
| Magnet Type | High-energy Strontium Ferrite |
| Protection Grille | Not included (sold separately) |
| Warranty | 1 year limited |
| Cleaning | Wipe with dry cloth; avoid liquids |
| Safety Notes | Disconnect battery before installation; secure wiring |
| Installation Kit | Includes screws, wire connectors, and manual |
Frequently Asked Questions - Kappa 62ix INFINITY
What is the ideal amplifier power for the Kappa 62ix?
The recommended amplifier power is 15 to 120 watts RMS per channel at 4 ohms. Exceeding this may cause distortion or damage.
Can I install the Kappa 62ix as component speakers?
Yes, the included crossover and brackets allow both coaxial and component installation. For component setup, mount the tweeter separately using the provided flush or angle mounts.
What is the mounting depth and cutout size?
The mounting depth is 2.5 inches (63 mm) and the cutout diameter is 5.7 inches (145 mm). Ensure your door or panel has sufficient clearance.
Do I need to break in the speakers?
While not required, a 10-20 hour break-in period at moderate volume helps loosen the suspension and optimize sound quality. Avoid high power during break-in.
What type of tweeter does the Kappa 62ix use?
It uses a 1-inch dome tweeter, typically made of textile or Mylar, with a neodymium magnet for high sensitivity and smooth highs.
How do I clean the speakers?
Use a dry, soft cloth to wipe the cone and tweeter. Do not use any liquids, cleaners, or compressed air as they may damage the materials.
What is the warranty period?
Infinity provides a 1-year limited warranty covering defects in materials and workmanship. Keep your receipt for service.
Can I use the Kappa 62ix in a marine environment?
No, these speakers are designed for automotive interior use only. They are not weather or moisture resistant; exposure to water will void the warranty.
What gauge wire should I use for installation?
Use 16-18 AWG speaker wire for runs up to 20 feet. Ensure proper polarity (+/-) for correct phasing.
How do I adjust the tweeter level?
The external crossover has a built-in tweeter attenuation switch that allows you to adjust output by 0, -2, or -4 dB for tuning.
User questions about Kappa 62ix INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Kappa 62ix - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Kappa 62ix by INFINITY.
USER MANUAL Kappa 62ix INFINITY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INFINITY
Model : Kappa 62ix
Category : Loudspeaker