CC-1 - Loudspeaker INFINITY - Free user manual and instructions
Find the device manual for free CC-1 INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Infinity |
| Model | CC-1 |
| Product Type | Passive Bookshelf Loudspeaker |
| Dimensions (H x W x D) | 12.5 x 7.5 x 9.8 inches (318 x 191 x 249 mm) |
| Weight | 12.5 lbs (5.7 kg) each |
| Power Handling (RMS) | 100 watts |
| Impedance | 8 ohms |
| Frequency Response | 55 Hz – 22 kHz (±3 dB) |
| Sensitivity | 89 dB (2.83V/1m) |
| Drivers | 1-inch tweeter, 6.5-inch woofer |
| Enclosure Type | Bass reflex with front port |
| Recommended Amplifier Power | 20 – 150 watts per channel |
| Connectivity | Spring-loaded speaker wire terminals |
| Placement | Bookshelf, stand or wall-mount (brackets not included) |
| Cleaning | Wipe with dry cloth; do not use solvents or water |
| Safety | Do not expose to moisture; keep away from heat sources |
| Repairability | Drivers replaceable by qualified technician; no user-serviceable parts inside |
Frequently Asked Questions - CC-1 INFINITY
How should I place the Infinity CC-1 speakers for best sound?
Place the speakers at ear level, equidistant from your listening position, and at least 12 inches from walls to avoid bass boom. The front ported design allows placement near a wall if necessary, but experiment for optimal imaging.
What gauge speaker wire should I use?
Use 16-gauge or thicker speaker wire for runs up to 50 feet. For longer runs, use 14-gauge wire. Ensure proper polarity (positive to positive, negative to negative).
Can I connect the CC-1 directly to my TV?
No, the CC-1 is a passive speaker and requires an external amplifier or receiver. Connect the amplifier's speaker outputs to the speaker terminals.
How do I clean the speakers?
Gently dust the cabinet and grille with a soft dry cloth. Do not use any liquids, cleaners, or abrasive materials. To clean the grille, it can be removed and vacuumed gently with a soft brush attachment.
What is the recommended amplifier power for the CC-1?
An amplifier rated between 20 and 150 watts per channel into 8 ohms is ideal. Avoid underpowered amplifiers as clipping can damage the speakers.
Why is there no sound from my speakers?
Check that the amplifier is on and the correct input is selected. Verify speaker wire connections are secure and polarity matches. Ensure the speaker selector on the amplifier is properly set.
Can I use the CC-1 as a center channel speaker?
Yes, the CC-1 is designed as a center channel speaker. Place it horizontally below or above the TV, centered on the screen.
Is there a break-in period for these speakers?
Yes, new speakers may sound stiff initially. Play them at moderate volume for 20-40 hours to allow the suspension to loosen, resulting in smoother bass and more relaxed treble.
What should I do if the speakers produce a humming sound?
Hum is usually caused by a ground loop in the audio system. Try connecting all components to the same power strip. Ensure cable connections are tight, and use shielded interconnect cables. If the problem persists, try a ground loop isolator.
Does the Infinity CC-1 have a warranty?
Yes, Infinity typically offers a 5-year limited warranty for speakers. Keep your purchase receipt and contact Infinity support for claims. The warranty covers manufacturing defects but not damage from misuse or modifications.
User questions about CC-1 INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual CC-1 - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CC-1 by INFINITY.