CC-3 - Loudspeaker INFINITY - Free user manual and instructions
Find the device manual for free CC-3 INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Center Channel Loudspeaker |
| Brand | Infinity |
| Model | CC-3 |
| Dimensions (W x H x D) | 17.25 x 6.5 x 8.75 inches (438 x 165 x 222 mm) |
| Weight | 12.5 lbs (5.7 kg) |
| Enclosure Type | Bass reflex with front-firing port |
| Woofer | Two 5.25" (133mm) polypropylene cones with rubber surrounds |
| Tweeter | 1" (25mm) silk dome, shielded |
| Frequency Response | 55 Hz - 20 kHz ±3dB |
| Impedance | 8 ohms nominal |
| Sensitivity | 89 dB (2.83V @ 1m) |
| Power Handling (RMS) | 100 watts |
| Power Handling (Peak) | 200 watts |
| Crossover Frequency | 2.5 kHz |
| Connectors | Gold-plated binding posts (single wire) |
| Finish | Black vinyl laminate |
| Grille | Removable black cloth grille with magnetic attachment |
| Placement | Front center channel, horizontal orientation |
| Recommended Amplifier Power | 20 - 150 watts per channel |
| Shielding | Magnetically shielded for placement near CRT TVs |
| Safety Features | Non-skid feet; avoid overdriving amplifier |
| Cleaning | Wipe with dry cloth; do not use solvents |
| Parts and Repairability | Drivers and crossover replaceable; contact Infinity support |
| General Information | Part of Infinity's Classic series; designed for home theater |
Frequently Asked Questions - CC-3 INFINITY
How do I connect the Infinity CC-3 to my receiver?
Use a standard speaker cable. Strip the ends, insert into the binding posts on the back of the speaker and tighten. Ensure correct polarity: red to positive (+) terminal on receiver, black to negative (-).
What amplifier power is recommended for the CC-3?
Infinity recommends an amplifier with 20 to 150 watts per channel RMS. Higher power within this range provides better dynamic range without risk of damage.
Can I use the CC-3 as a bookshelf speaker?
The CC-3 is designed as a horizontal center channel. Using it vertically as a bookshelf speaker is possible but may alter the intended dispersion pattern; for best results, keep it horizontal.
How should I place the CC-3 for optimal sound?
Place the CC-3 directly above or below your TV, at ear level when seated. Keep it away from walls or corners to avoid boomy bass. Ensure the front of the speaker is at the same distance from the listening position as the left and right speakers.
How do I clean the CC-3?
Use a soft, dry cloth to wipe the cabinet. For the grille, gently vacuum with a soft brush attachment. Do not use water, solvents, or abrasive cleaners.
What is the impedance of the CC-3?
The nominal impedance is 8 ohms. Make sure your receiver is rated to drive 8-ohm speakers.
Is the CC-3 magnetically shielded?
Yes, the CC-3 is magnetically shielded, making it safe to place near older CRT televisions without causing color distortion.
Why is there no sound coming from the speaker?
Check that the speaker wire is properly connected to both the receiver and the speaker. Verify the receiver is set to output sound to the center channel. Also test with a different speaker or source to isolate the issue.
Can I bi-wire or bi-amp the CC-3?
The CC-3 has only one pair of binding posts, so it does not support bi-wiring or bi-amping. Use a single speaker cable for each channel.
What is the warranty on the Infinity CC-3?
Infinity typically offers a 5-year limited warranty on passive speakers. Check your regional distributor for exact terms. Retain your purchase receipt.
User questions about CC-3 INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual CC-3 - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CC-3 by INFINITY.