E10 - Drone Snaptain - Free user manual and instructions
Find the device manual for free E10 Snaptain in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Drone |
| Brand | Snaptain |
| Model | E10 |
| Dimensions (folded) | 145 x 105 x 55 mm |
| Weight (with battery) | 85 g |
| Battery Capacity | 3.7V 600 mAh Li-ion |
| Flight Time | 8-10 minutes per battery |
| Charging Time | 60-90 minutes |
| Controller Frequency | 2.4 GHz |
| Maximum Range | 50 m |
| Camera Resolution | 720p HD (1280x720) |
| Camera Angle | Adjustable via app |
| Motor Type | Brushed coreless motor |
| Gyroscope | 6-axis gyro stabilization |
| Functions | Altitude hold, headless mode, one-key takeoff/landing, 3D flips, speed adjustment |
| Spare Parts | Replacement propellers, batteries, and chargers available |
| Cleaning | Wipe with soft dry cloth; avoid water and solvents |
| Safety Features | Low battery alarm, emergency stop, propeller guards |
| Compatible Devices | Smartphones with iOS 8.0+ / Android 4.4+ |
| Recommended Age | 14 years and up |
Frequently Asked Questions - E10 Snaptain
How do I pair the drone with the remote controller?
Turn on the drone first, then turn on the remote. The drone's lights will blink; push the left stick up and down once. The lights become solid, indicating successful pairing. Ensure both are within 1 meter.
What is the maximum flight time?
The Snaptain E10 provides approximately 8-10 minutes of flight time per fully charged battery. It is recommended to have spare batteries for extended flights.
How can I improve the camera quality?
Adjust the camera angle via the Snaptain Nova app. Ensure the lens is clean and fly in well-lit conditions. The camera records in 720p HD, so lower light may reduce quality.
What should I do if the drone does not take off?
Check that the battery is charged and properly inserted. Ensure the propellers are securely attached and spinning freely. Also confirm that the drone is on a flat surface and the calibration is successful (blinking lights always before takeoff).
How do I calibrate the drone?
Place the drone on a level surface. Push both sticks to the bottom-left corners for 2-3 seconds until the lights flash quickly. Then move both sticks to the bottom-right corners for 2-3 seconds. The lights will become solid, meaning calibration is done.
Can I fly the drone in windy conditions?
The Snaptain E10 is designed for indoor or calm outdoor conditions. Wind speeds above 10 km/h can affect stability. Avoid flying in strong winds to prevent loss of control.
How do I replace a broken propeller?
Use the included screwdriver to remove the screw. Pull off the old propeller and press the new one firmly onto the shaft. Ensure the propeller markings (A/B) match the motor arms. Tighten the screw securely.
What does the headless mode do?
In headless mode, the drone's forward direction is based on the pilot's orientation rather than the drone's nose. This is helpful for beginners when the drone is far away, as pushing forward always moves away from the pilot.
How long does it take to fully charge the battery?
The battery charges in about 60-90 minutes using the included USB charging cable. Do not exceed the charging time and never leave the battery unattended during charging.
My drone's lights are blinking rapidly - what does that mean?
Rapid blinking lights usually indicate a low battery or a calibration error. If the battery is low, land immediately and recharge. If after calibration it still blinks, try re-binding the controller.
User questions about E10 Snaptain
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drone in PDF format for free! Find your manual E10 - Snaptain and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E10 by Snaptain.