EKI-1521I-CE - Server Advantech - Free user manual and instructions
Find the device manual for free EKI-1521I-CE Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Serial Device Server |
| Brand | Advantech |
| Model | EKI-1521I-CE |
| Dimensions (W x D x H) | 100 mm x 100 mm x 30 mm |
| Weight | 200 g |
| Power Supply | 12-48 VDC |
| Serial Interface | RS-232/422/485 |
| Ethernet Interface | 10/100Base-TX |
| Maximum Baud Rate | 921.6 kbps |
| Operating Temperature | -40°C to 75°C |
| Protocols | TCP, UDP, HTTP, SNMP |
| Mounting | DIN-Rail, Wall |
| Certifications | CE, FCC |
| Power Consumption | 4 W |
| LED Indicators | PWR, Link/Act, Serial Tx/Rx |
| Connector Type | DB9 Male, RJ45 |
| Operating System Support | Windows, Linux |
| Management | Web, Telnet, Utility |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Disconnect power before servicing; use approved power adapter |
| Spare Parts | Not applicable; contact Advantech support for repairs |
| Reparability | Not user-serviceable; refer to manual for troubleshooting |
Frequently Asked Questions - EKI-1521I-CE Advantech
How do I set up the EKI-1521I-CE for the first time?
Connect the device to power (12-48 VDC) and your network via Ethernet. Use the included utility software or web browser to configure the IP address and serial parameters. Refer to the manual for detailed steps.
What is the default IP address of the EKI-1521I-CE?
The default IP address is 192.168.1.1. You can also use the utility software to discover the device on the network.
How do I reset the EKI-1521I-CE to factory defaults?
Press and hold the reset button (located near the power connector) for 5 seconds until the PWR LED blinks. The device will reboot with factory settings.
Can I use the EKI-1521I-CE with a baud rate higher than 115200?
Yes, the device supports baud rates up to 921.6 kbps. Ensure your serial device also supports the desired baud rate.
How do I configure the serial port settings?
Access the web interface or use the utility software. Under 'Serial Settings', you can set baud rate, data bits, parity, stop bits, and flow control.
What should I do if the device is not connecting to the network?
Check the Ethernet cable and LED indicators. Verify that the IP address is correctly configured and that your network allows the device. Try pinging the IP address.
Is the EKI-1521I-CE compatible with Windows 10?
Yes, the device works with Windows 10, Linux, and other operating systems. Use the provided utility software or serial/IP driver.
How do I update the firmware?
Download the latest firmware from Advantech's website. Access the web interface, go to 'System > Firmware Upgrade', and upload the file. Do not power off during update.
What is the power consumption of the EKI-1521I-CE?
The typical power consumption is 4 W. Use a power supply rated for 12-48 VDC with at least 1 A.
Can I mount the device on a DIN rail?
Yes, the EKI-1521I-CE supports DIN-rail mounting. An optional mounting kit may be required; check the manual for details.
User questions about EKI-1521I-CE Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual EKI-1521I-CE - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKI-1521I-CE by Advantech.
USER MANUAL EKI-1521I-CE Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : EKI-1521I-CE
Category : Server