EKI-1524CI-CE - Server Advantech - Free user manual and instructions
Find the device manual for free EKI-1524CI-CE Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Managed Ethernet Switch / Server Appliance |
| Brand | Advantech |
| Model | EKI-1524CI-CE |
| Number of Ports | 24 (10/100/1000Base-T(X)) |
| Mounting Type | 1U Rackmount or DIN-rail |
| Dimensions (W x H x D) | 440 x 44 x 200 mm |
| Weight | 2.5 kg |
| Power Input | 12-48 VDC (dual redundant) |
| Power Consumption | 15 W (typical) |
| Operating Temperature | -40 to 75°C |
| Storage Temperature | -40 to 85°C |
| Humidity | 5-95% (non-condensing) |
| Network Management | SNMP v1/v2c/v3, Web, Telnet, CLI, RMON, VLAN, QoS, IGMP, STP/RSTP |
| Safety Certifications | CE, FCC Class A, UL 61010-1/EN 62368-1 |
| Warranty | 5 years limited |
| Maintenance & Cleaning | Use a dry cloth; avoid solvents. Keep vents clean. |
| Spare Parts | Contact Advantech support for replacement power supplies or fan modules. |
| Repairability | Field-replaceable fan and power supply; CPU/mainboard repair by authorized service. |
Frequently Asked Questions - EKI-1524CI-CE Advantech
How to reset the EKI-1524CI-CE to factory defaults?
Press and hold the reset button on the front panel for 10 seconds while the device is powered on. The device will reboot with factory settings. Alternatively, use the CLI command reset config.
How to configure VLANs on this switch?
Access the web interface (default IP 192.168.1.1) or CLI. Navigate to VLAN settings, create VLAN IDs, and assign ports with tagged/untagged membership. Use 802.1Q VLAN for trunking.
How to update the firmware?
Download the latest firmware from Advantech's website. Upload the file via the web interface under 'System' > 'Firmware Upgrade' or use TFTP from the CLI with the firmware upgrade tftp://ip/filename command.
What is the default IP address?
The default IP address is 192.168.1.1 with subnet mask 255.255.255.0. The default login credentials are 'admin' for both username and password.
How to connect to the console port?
Use a standard RS-232 serial cable (DB9 to RJ45) connected to the console port. Configure your terminal software with 115200 baud rate, 8 data bits, no parity, 1 stop bit, and no flow control.
How to mount the device on a DIN rail?
Attach the DIN-rail bracket (included) to the rear of the device. Clip the bracket onto a standard 35mm DIN rail and secure by tightening the screw. Ensure proper ventilation around the unit.
What power supply is required?
The device accepts 12-48 VDC input via the terminal block. Use a redundant power supply for reliability. The power consumption is 15W typical, so a 24W or higher supply is recommended.
How to troubleshoot no link on a port?
Check the cable integrity and type (straight-through or crossover). Ensure the port is not disabled via management. Verify the connected device is powered on. Use the CLI command show interface status to check.
What do the LED indicators mean?
PWR LED: solid green (power), off (no power). SYS LED: blinking green (system normal). Port LEDs: solid green (link), blinking (activity), off (no link). Refer to the manual for detailed status patterns.
How to access the web interface?
Connect your PC to any port, set your PC's IP to 192.168.1.x (e.g., 192.168.1.2). Open a browser and go to https://192.168.1.1. Use default credentials: admin/admin. For first-time access, you may need to accept the security certificate.
User questions about EKI-1524CI-CE Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual EKI-1524CI-CE - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EKI-1524CI-CE by Advantech.