4P6G-PCIE-SATA-CARD - Expansion card StarTech.com - Free user manual and instructions
Find the device manual for free 4P6G-PCIE-SATA-CARD StarTech.com in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PCIe SATA Expansion Card |
| Brand | StarTech.com |
| Model | 4P6G-PCIE-SATA-CARD |
| Interface | PCI Express x1 (rev 2.0) |
| Number of SATA Ports | 4 (internal) |
| Data Transfer Rate | 6 Gbps per port (SATA III) |
| Supported Devices | 2.5" and 3.5" SATA hard drives and SSDs |
| Form Factor | Low profile / standard bracket included |
| Dimensions (L x W x H) | 6.0 in x 4.7 in x 0.6 in (15.2 cm x 11.9 cm x 1.5 cm) |
| Weight | 1.5 oz (42 g) |
| Power Supplied | Powered by PCIe slot (no external power required) |
| Power Consumption | 4.5 W (typical) |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Operating Humidity | 10% to 85% RH (non-condensing) |
| Compliance | RoHS, PCI Express base spec |
| Included Accessories | Quick start guide, low profile bracket |
| System Requirements | Windows, Linux, macOS with available PCIe slot |
| Maintenance | Keep free of dust; clean with dry cloth if needed |
| Safety Precautions | Disconnect power before installation; use anti-static precautions |
| Warranty | 2 years (lifetime technical support) |
| Repairability | Sealed unit; no user-serviceable parts |
Frequently Asked Questions - 4P6G-PCIE-SATA-CARD StarTech.com
Does this card support RAID?
No, this card is a standard SATA host adapter and does not support hardware RAID. It can be used with software RAID from your operating system.
Is it compatible with Windows 10 and Windows 11?
Yes, the card uses a standard SATA controller driver included in Windows, so it is fully compatible with Windows 10 and 11 without additional drivers.
Does it require external power?
No, the card is powered entirely through the PCIe slot. It does not require any additional power connectors.
Can I use this card with SSDs?
Yes, it supports SATA SSDs and HDDs at 6 Gbps, 3 Gbps, and 1.5 Gbps speeds.
How do I install drivers?
For Windows, the drivers are built-in. For Linux and macOS, they are included in the kernel. No manual driver installation is typically needed.
Does it support hot swapping?
Yes, if the motherboard and OS support hot-swap, the card supports it natively. Ensure AHCI mode is enabled in BIOS.
What is the maximum cable length for SATA cables?
The standard SATA specification allows cable lengths up to 1 meter (39 inches). For longer distances, use powered extenders.
Does it come with a low profile bracket?
Yes, the package includes both a standard and a low profile bracket to fit different cases.
Can I boot from a drive connected to this card?
Yes, most motherboards support booting from PCIe SATA controllers. Enable the option in BIOS boot order.
How can I verify the card is working?
After installation, check Device Manager (Windows) or `lspci` (Linux) for the controller listing. Connected drives should appear in Disk Management or equivalent.
User questions about 4P6G-PCIE-SATA-CARD StarTech.com
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Expansion card in PDF format for free! Find your manual 4P6G-PCIE-SATA-CARD - StarTech.com and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 4P6G-PCIE-SATA-CARD by StarTech.com.
USER MANUAL 4P6G-PCIE-SATA-CARD StarTech.com
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : StarTech.com
Model : 4P6G-PCIE-SATA-CARD
Category : Expansion card