AT-VGW-SW - Uncategorized Atlona - Free user manual and instructions
Find the device manual for free AT-VGW-SW Atlona in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDMI Switcher / Matrix |
| Dimensions (H x W x D) | 1.75 x 17.0 x 10.0 inches (4.4 x 43.2 x 25.4 cm) |
| Weight | 5.5 lbs (2.5 kg) |
| Power Supply | 100-240 VAC, 50/60 Hz, internal |
| Power Consumption | 30W (max) |
| Video Input Ports | 4x HDMI (Type A) |
| Video Output Ports | 4x HDMI (Type A) |
| Maximum Resolution | 4K@60Hz (4:4:4, 8-bit) |
| HDCP Support | HDCP 2.2 and 1.4 |
| Audio Support | LPCM 7.1, Dolby TrueHD, DTS-HD Master Audio |
| Control Options | IR, RS-232, TCP/IP, front panel |
| Mounting | 1U rackmount ears included |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 10% to 90%, non-condensing |
| Warranty | 2 years limited |
| Compliance | CE, FCC, RoHS |
Frequently Asked Questions - AT-VGW-SW Atlona
How do I connect the AT-VGW-SW to my display?
Use a high-speed HDMI cable to connect any output port to your display's input. Ensure the display is powered on and set to the correct input source.
What is the maximum resolution supported?
The device supports resolutions up to 4K@60Hz with 4:4:4 chroma subsampling and 8-bit color depth.
Can I control the switcher via a mobile app?
Yes, the AT-VGW-SW supports TCP/IP control. Use the Atlona Management System (AMS) or a third-party app to switch sources over your network.
How do I update the firmware?
Download the latest firmware from the Atlona website. Connect the device via USB or network and follow the instructions in the user manual.
Why is there no picture on my display?
Check that all HDMI cables are securely connected and the source is powered on. Verify the display input matches the output port used. Try a different cable or port.
Does the device support HDCP?
Yes, it supports HDCP 2.2 and HDCP 1.4 for compatibility with protected content.
Can I use the RS-232 port for control?
Yes, use a DB9 cable to connect to a control system. Refer to the manual for the command set and baud rate settings.
How do I perform a factory reset?
Press and hold the 'Menu' button on the front panel for 10 seconds until the LEDs flash. Alternatively, use the web interface or serial command.
What is the power consumption?
The maximum power consumption is 30W. Use the included power cord and ensure the outlet provides 100-240 VAC.
Is the device rack-mountable?
Yes, it comes with rackmount ears for installation in a standard 19-inch rack, occupying 1U of space.
User questions about AT-VGW-SW Atlona
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AT-VGW-SW - Atlona and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-VGW-SW by Atlona.
USER MANUAL AT-VGW-SW Atlona
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atlona
Model : AT-VGW-SW
Category : Uncategorized