AT-PC530 - Uncategorized Atlona - Free user manual and instructions
Find the device manual for free AT-PC530 Atlona in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Presentation Switcher/Scaler |
| Dimensions (HxWxD) | 1.75 x 8.5 x 4.5 in (4.4 x 21.6 x 11.4 cm) |
| Weight | 1.8 lbs (0.8 kg) |
| Power Supply | 5V DC, 2A (external adapter included) |
| Inputs | 2x HDMI, 1x VGA, 1x Composite (RCA) |
| Outputs | 1x HDMI, 1x VGA (for local monitor) |
| Maximum Resolution | 4K@60Hz 4:4:4 (HDMI); 1920x1200 (VGA) |
| Supported Audio | PCM, Dolby Digital, DTS up to 7.1 |
| Control Method | Front panel buttons, IR remote, RS-232 |
| Key Functions | Seamless switching, scaling, EDID management, audio extraction |
| Maintenance | Clean with soft dry cloth; do not use liquids or solvents |
| Safety Precautions | Do not expose to moisture, extreme temperatures, or direct sunlight |
| Spare Parts & Repairability | Not user-serviceable; contact Atlona support for service |
| General Information | 3-year limited warranty; RoHS compliant |
Frequently Asked Questions - AT-PC530 Atlona
How do I connect my sources to the AT-PC530?
Connect your HDMI or VGA sources to the corresponding inputs on the rear panel. Then connect the HDMI or VGA output to your display. Power on the device and select the input using the front panel buttons or remote.
Can I switch between inputs seamlessly?
Yes, the AT-PC530 supports seamless switching, so there is no black screen or signal interruption when changing sources.
What is the maximum supported resolution?
The maximum resolution over HDMI is 4K@60Hz 4:4:4 (up to 600 MHz pixel clock). For VGA, it supports up to 1920x1200.
Does the AT-PC530 support HDCP?
Yes, it supports HDCP 2.2 for protected content playback.
How can I control the unit remotely?
You can control the AT-PC530 via the included IR remote or through RS-232 commands. Refer to the manual for the full command set.
How do I adjust the output resolution?
The output resolution can be set by adjusting the EDID settings on the front panel or via RS-232. The unit can also automatically scale to the display's native resolution.
What should I do if there is no signal on the display?
First, check that all cables are securely connected. Verify that the input source is powered on and outputting a signal. Try switching to a different input. If the issue persists, reset the unit by unplugging power for 10 seconds.
Can I extract audio from HDMI?
Yes, the AT-PC530 features audio extraction. You can send audio from the HDMI input to a separate analog output (stereo RCA) or to the HDMI output.
How do I update the firmware?
Firmware updates are performed via a USB port on the front panel. Download the latest firmware from the Atlona website, copy it to a USB flash drive, and follow the update procedure in the manual.
Where can I find the full user manual?
The complete user manual for the Atlona AT-PC530 can be downloaded for free from notice-facile.com or the official Atlona website.
User questions about AT-PC530 Atlona
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AT-PC530 - Atlona and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-PC530 by Atlona.
USER MANUAL AT-PC530 Atlona
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atlona
Model : AT-PC530
Category : Uncategorized