CSM 10 - Measurement PCE Instruments - Free user manual and instructions
Find the device manual for free CSM 10 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Coating Thickness Gauge |
| Brand | PCE Instruments |
| Model | CSM 10 |
| Measuring Principle | Magnetic induction |
| Measurement Range | 0 – 5000 µm (0 – 196 mils) |
| Accuracy | ±(2% of reading + 1 µm) |
| Resolution | 1 µm (0.1 mils) |
| Substrate | Ferrous (iron/steel) |
| Probe | Built-in, single point |
| Display | LCD with backlight |
| Units | µm, mils selectable |
| Data Storage | Not available |
| Power Supply | 2 x 1.5V AA batteries |
| Battery Life | Approximately 50 hours continuous use |
| Dimensions | 150 x 80 x 30 mm (5.9 x 3.1 x 1.2 in) |
| Weight | 200 g (0.44 lbs) including batteries |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -10°C to 60°C (14°F to 140°F) |
| Calibration | Zero and foil calibration |
| Maintenance | Clean probe tip after each use; calibrate periodically |
| Safety | Avoid impact, store in dry place |
| Spare Parts | Batteries, calibration foils |
| Reparability | Contact manufacturer for service |
Frequently Asked Questions - CSM 10 PCE Instruments
What is the measuring principle of the PCE CSM 10?
The PCE CSM 10 uses the magnetic induction principle, suitable for measuring non-magnetic coatings on ferrous substrates.
Can I measure coatings on non-ferrous metals?
No, the CSM 10 is designed only for ferrous substrates (e.g., steel). For non-ferrous, you would need an eddy current gauge.
How do I calibrate the device?
To calibrate, first perform a zero calibration on an uncoated ferrous plate, then use a calibration foil of known thickness to adjust the reading.
What is the measurement range and accuracy?
The range is 0 to 5000 µm (0–196 mils) with an accuracy of ±(2% of reading + 1 µm).
How long do the batteries last?
With standard AA alkaline batteries, the device provides approximately 50 hours of continuous use.
What units are available?
You can switch between micrometers (µm) and mils directly on the device.
Does the CSM 10 have data logging capabilities?
No, the basic model does not include data storage. For logging, consider the CSM 10 with Bluetooth option.
How do I clean and maintain the probe?
Gently wipe the probe tip with a soft, lint-free cloth after each measurement. Avoid abrasive materials.
What is the warranty period?
PCE Instruments typically offers a 2-year warranty against manufacturing defects. Check your local dealer for details.
Where can I purchase spare parts?
Spare parts such as batteries, calibration foils, and replacement probes are available from PCE Instruments or authorized distributors.
User questions about CSM 10 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual CSM 10 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CSM 10 by PCE Instruments.
USER MANUAL CSM 10 PCE Instruments
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCE Instruments
Model : CSM 10
Category : Measurement