K-1270-IP-EWP - Access Control System VIKING - Free user manual and instructions
Find the device manual for free K-1270-IP-EWP VIKING in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control System |
| Model | K-1270-IP-EWP |
| Brand | Viking |
| Dimensions (H x W x D) | 12.4 x 7.5 x 3.2 inches (315 x 191 x 81 mm) |
| Weight | 3.5 lbs (1.6 kg) |
| Power Supply | 12 VDC, 500 mA (power supply included) |
| Network Interface | 10/100 Base-T Ethernet (RJ-45) |
| IP Rating | IP65 (weatherproof) |
| Reader Type | EM/Mifare 13.56 MHz (contactless) |
| Keypad | 12-key backlit keypad |
| User Capacity | Up to 10,000 users |
| Event Log | Up to 50,000 events |
| Operating Temperature | -40°F to 140°F (-40°C to 60°C) |
| Enclosure Material | Polycarbonate, tamper-resistant |
| Maintenance | Periodic cleaning with soft cloth; keep dry |
| Security Features | Tamper alarm, encryption, anti-passback |
| Spare Parts | Reader module, power supply, mounting bracket |
| Repairability | Field-replaceable modules; do not disassemble |
| General Information | Designed for indoor/outdoor access control; supports PoE |
Frequently Asked Questions - K-1270-IP-EWP VIKING
How do I install the Viking K-1270-IP-EWP access control system?
Mount the unit at the desired location using the included bracket. Connect power (12 VDC or PoE) and network cable. Configure the system via the web interface using the default IP address.
What types of credentials does the K-1270-IP-EWP support?
It supports 13.56 MHz EM/Mifare contactless cards and keypad PIN codes. Up to 10,000 users can be enrolled.
How do I reset the system to factory defaults?
Press and hold the reset button on the unit for 10 seconds. The device will reboot with factory settings. Note that this erases all user data.
Can the K-1270-IP-EWP be used outdoors?
Yes, it has an IP65 rating, making it weatherproof. However, avoid direct exposure to high-pressure water jets.
What is the maximum number of users and events?
The system supports up to 10,000 users and logs up to 50,000 events, which can be viewed via the web interface.
Does the device support Power over Ethernet (PoE)?
Yes, the K-1270-IP-EWP supports IEEE 802.3af PoE, simplifying installation by eliminating separate power wiring.
How do I add a new user via the keypad?
Enter programming mode by pressing * # 12345 # (default master code). Then follow the prompts to add a card or PIN. Refer to the manual for detailed steps.
What should I do if the unit shows a tamper alarm?
Check that the enclosure is securely closed and the tamper switch is aligned. If the alarm persists, inspect for physical damage or contact support.
Can I connect the system to a third-party access control software?
Yes, it supports standard protocols like Wiegand and OSDP, as well as API integration with many software platforms.
How do I update the firmware?
Download the latest firmware from the Viking website. Log into the web interface, go to System Settings > Firmware Update, and upload the file. Do not power off during update.
User questions about K-1270-IP-EWP VIKING
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual K-1270-IP-EWP - VIKING and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. K-1270-IP-EWP by VIKING.
USER MANUAL K-1270-IP-EWP VIKING
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : VIKING
Model : K-1270-IP-EWP
Category : Access Control System